MediaWiki REL1_33
ApiBlock.php
Go to the documentation of this file.
1<?php
29class ApiBlock extends ApiBase {
30
37 public function execute() {
38 $this->checkUserRightsAny( 'block' );
39
40 $user = $this->getUser();
42
43 $this->requireOnlyOneParameter( $params, 'user', 'userid' );
44
45 # T17810: blocked admins should have limited access here
46 if ( $user->isBlocked() ) {
48 if ( $status !== true ) {
49 $this->dieWithError(
50 $status,
51 null,
52 [ 'blockinfo' => ApiQueryUserInfo::getBlockInfo( $user->getBlock() ) ]
53 );
54 }
55 }
56
57 $editingRestriction = 'sitewide';
58 $pageRestrictions = '';
59 $namespaceRestrictions = '';
60 if ( $this->getConfig()->get( 'EnablePartialBlocks' ) ) {
61 if ( $params['partial'] ) {
62 $editingRestriction = 'partial';
63 }
64
65 $pageRestrictions = implode( "\n", (array)$params['pagerestrictions'] );
66 $namespaceRestrictions = implode( "\n", (array)$params['namespacerestrictions'] );
67 }
68
69 if ( $params['userid'] !== null ) {
70 $username = User::whoIs( $params['userid'] );
71
72 if ( $username === false ) {
73 $this->dieWithError( [ 'apierror-nosuchuserid', $params['userid'] ], 'nosuchuserid' );
74 } else {
75 $params['user'] = $username;
76 }
77 } else {
78 list( $target, $type ) = SpecialBlock::getTargetAndType( $params['user'] );
79
80 // T40633 - if the target is a user (not an IP address), but it
81 // doesn't exist or is unusable, error.
82 if ( $type === Block::TYPE_USER &&
83 ( $target->isAnon() /* doesn't exist */ || !User::isUsableName( $params['user'] ) )
84 ) {
85 $this->dieWithError( [ 'nosuchusershort', $params['user'] ], 'nosuchuser' );
86 }
87 }
88
89 if ( $params['tags'] ) {
90 $ableToTag = ChangeTags::canAddTagsAccompanyingChange( $params['tags'], $user );
91 if ( !$ableToTag->isOK() ) {
92 $this->dieStatus( $ableToTag );
93 }
94 }
95
96 if ( $params['hidename'] && !$user->isAllowed( 'hideuser' ) ) {
97 $this->dieWithError( 'apierror-canthide' );
98 }
99 if ( $params['noemail'] && !SpecialBlock::canBlockEmail( $user ) ) {
100 $this->dieWithError( 'apierror-cantblock-email' );
101 }
102
103 $data = [
104 'PreviousTarget' => $params['user'],
105 'Target' => $params['user'],
106 'Reason' => [
107 $params['reason'],
108 'other',
109 $params['reason']
110 ],
111 'Expiry' => $params['expiry'],
112 'HardBlock' => !$params['anononly'],
113 'CreateAccount' => $params['nocreate'],
114 'AutoBlock' => $params['autoblock'],
115 'DisableEmail' => $params['noemail'],
116 'HideUser' => $params['hidename'],
117 'DisableUTEdit' => !$params['allowusertalk'],
118 'Reblock' => $params['reblock'],
119 'Watch' => $params['watchuser'],
120 'Confirm' => true,
121 'Tags' => $params['tags'],
122 'EditingRestriction' => $editingRestriction,
123 'PageRestrictions' => $pageRestrictions,
124 'NamespaceRestrictions' => $namespaceRestrictions,
125 ];
126
127 $status = SpecialBlock::validateTarget( $params['user'], $user );
128 if ( !$status->isOK() ) {
129 $this->dieStatus( $status );
130 }
131
132 $retval = SpecialBlock::processForm( $data, $this->getContext() );
133 if ( $retval !== true ) {
134 $this->dieStatus( $this->errorArrayToStatus( $retval ) );
135 }
136
137 list( $target, /*...*/ ) = SpecialBlock::getTargetAndType( $params['user'] );
138 $res['user'] = $params['user'];
139 $res['userID'] = $target instanceof User ? $target->getId() : 0;
140
141 $block = Block::newFromTarget( $target, null, true );
142 if ( $block instanceof Block ) {
143 $res['expiry'] = ApiResult::formatExpiry( $block->getExpiry(), 'infinite' );
144 $res['id'] = $block->getId();
145 } else {
146 # should be unreachable
147 $res['expiry'] = ''; // @codeCoverageIgnore
148 $res['id'] = ''; // @codeCoverageIgnore
149 }
150
151 $res['reason'] = $params['reason'];
152 $res['anononly'] = $params['anononly'];
153 $res['nocreate'] = $params['nocreate'];
154 $res['autoblock'] = $params['autoblock'];
155 $res['noemail'] = $params['noemail'];
156 $res['hidename'] = $params['hidename'];
157 $res['allowusertalk'] = $params['allowusertalk'];
158 $res['watchuser'] = $params['watchuser'];
159
160 if ( $this->getConfig()->get( 'EnablePartialBlocks' ) ) {
161 $res['partial'] = $params['partial'];
162 $res['pagerestrictions'] = $params['pagerestrictions'];
163 $res['namespacerestrictions'] = $params['namespacerestrictions'];
164 }
165
166 $this->getResult()->addValue( null, $this->getModuleName(), $res );
167 }
168
169 public function mustBePosted() {
170 return true;
171 }
172
173 public function isWriteMode() {
174 return true;
175 }
176
177 public function getAllowedParams() {
178 $params = [
179 'user' => [
180 ApiBase::PARAM_TYPE => 'user',
181 ],
182 'userid' => [
183 ApiBase::PARAM_TYPE => 'integer',
184 ],
185 'expiry' => 'never',
186 'reason' => '',
187 'anononly' => false,
188 'nocreate' => false,
189 'autoblock' => false,
190 'noemail' => false,
191 'hidename' => false,
192 'allowusertalk' => false,
193 'reblock' => false,
194 'watchuser' => false,
195 'tags' => [
196 ApiBase::PARAM_TYPE => 'tags',
198 ],
199 ];
200
201 if ( $this->getConfig()->get( 'EnablePartialBlocks' ) ) {
202 $params['partial'] = false;
203 $params['pagerestrictions'] = [
207 ];
208 $params['namespacerestrictions'] = [
210 ApiBase::PARAM_TYPE => 'namespace',
211 ];
212 }
213
214 return $params;
215 }
216
217 public function needsToken() {
218 return 'csrf';
219 }
220
221 protected function getExamplesMessages() {
222 // phpcs:disable Generic.Files.LineLength
223 return [
224 'action=block&user=192.0.2.5&expiry=3%20days&reason=First%20strike&token=123ABC'
225 => 'apihelp-block-example-ip-simple',
226 'action=block&user=Vandal&expiry=never&reason=Vandalism&nocreate=&autoblock=&noemail=&token=123ABC'
227 => 'apihelp-block-example-user-complex',
228 ];
229 // phpcs:enable
230 }
231
232 public function getHelpUrls() {
233 return 'https://www.mediawiki.org/wiki/Special:MyLanguage/API:Block';
234 }
235}
and that you know you can do these things To protect your we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the or if you modify it For if you distribute copies of such a whether gratis or for a you must give the recipients all the rights that you have You must make sure that receive or can get the source code And you must show them these terms so they know their rights We protect your rights with two and(2) offer you this license which gives you legal permission to copy
This abstract class implements many basic API functions, and is the base of all API classes.
Definition ApiBase.php:37
checkUserRightsAny( $rights, $user=null)
Helper function for permission-denied errors.
Definition ApiBase.php:2105
dieWithError( $msg, $code=null, $data=null, $httpCode=null)
Abort execution with an error.
Definition ApiBase.php:1990
const PARAM_ISMULTI_LIMIT1
(integer) Maximum number of values, for normal users.
Definition ApiBase.php:208
const PARAM_TYPE
(string|string[]) Either an array of allowed value strings, or a string type as described below.
Definition ApiBase.php:87
errorArrayToStatus(array $errors, User $user=null)
Turn an array of message keys or key+param arrays into a Status.
Definition ApiBase.php:1801
const PARAM_ISMULTI_LIMIT2
(integer) Maximum number of values, for users with the apihighimits right.
Definition ApiBase.php:215
getResult()
Get the result object.
Definition ApiBase.php:632
extractRequestParams( $options=[])
Using getAllowedParams(), this function makes an array of the values provided by the user,...
Definition ApiBase.php:743
getModuleName()
Get the name of the module being executed by this instance.
Definition ApiBase.php:512
dieStatus(StatusValue $status)
Throw an ApiUsageException based on the Status object.
Definition ApiBase.php:2061
requireOnlyOneParameter( $params, $required)
Die if none or more than one of a certain set of parameters is set and not false.
Definition ApiBase.php:875
const PARAM_ISMULTI
(boolean) Accept multiple pipe-separated values for this parameter (e.g.
Definition ApiBase.php:51
API module that facilitates the blocking of users.
Definition ApiBlock.php:29
needsToken()
Returns the token type this module requires in order to execute.
Definition ApiBlock.php:217
getExamplesMessages()
Returns usage examples for this module.
Definition ApiBlock.php:221
isWriteMode()
Indicates whether this module requires write mode.
Definition ApiBlock.php:173
mustBePosted()
Indicates whether this module must be called with a POST request.
Definition ApiBlock.php:169
getAllowedParams()
Returns an array of allowed parameters (parameter name) => (default value) or (parameter name) => (ar...
Definition ApiBlock.php:177
execute()
Blocks the user specified in the parameters for the given expiry, with the given reason,...
Definition ApiBlock.php:37
getHelpUrls()
Return links to more detailed help pages about the module.
Definition ApiBlock.php:232
static getBlockInfo(Block $block)
Get basic info about a given block.
static formatExpiry( $expiry, $infinity='infinity')
Format an expiry timestamp for API output.
const TYPE_USER
Definition Block.php:96
static newFromTarget( $specificTarget, $vagueTarget=null, $fromMaster=false)
Given a target and the target's type, get an existing Block object if possible.
Definition Block.php:1403
static canAddTagsAccompanyingChange(array $tags, User $user=null)
Is it OK to allow the user to apply all the specified tags at the same time as they edit/make the cha...
getContext()
Get the base IContextSource object.
static processForm(array $data, IContextSource $context)
Given the form data, actually implement a block.
static validateTarget( $value, User $user)
Validate a block target.
static getTargetAndType( $par, WebRequest $request=null)
Determine the target of the block, and the type of target.
static checkUnblockSelf( $target, User $performer)
T17810: blocked admins should not be able to block/unblock others, and probably shouldn't be able to ...
static canBlockEmail( $user)
Can we do an email block?
The User object encapsulates all of the user-specific settings (user_id, name, rights,...
Definition User.php:48
getId()
Get the user's ID.
Definition User.php:2425
static isUsableName( $name)
Usernames which fail to pass this function will be blocked from user login and new account registrati...
Definition User.php:1042
static whoIs( $id)
Get the username corresponding to a given user ID.
Definition User.php:885
$res
Definition database.txt:21
deferred txt A few of the database updates required by various functions here can be deferred until after the result page is displayed to the user For updating the view updating the linked to tables after a etc PHP does not yet have any way to tell the server to actually return and disconnect while still running these but it might have such a feature in the future We handle these by creating a deferred update object and putting those objects on a global list
Definition deferred.txt:11
this hook is for auditing only or null if authentication failed before getting that far $username
Definition hooks.txt:782
Status::newGood()` to allow deletion, and then `return false` from the hook function. Ensure you consume the 'ChangeTagAfterDelete' hook to carry out custom deletion actions. $tag:name of the tag $user:user initiating the action & $status:Status object. See above. 'ChangeTagsListActive':Allows you to nominate which of the tags your extension uses are in active use. & $tags:list of all active tags. Append to this array. 'ChangeTagsAfterUpdateTags':Called after tags have been updated with the ChangeTags::updateTags function. Params:$addedTags:tags effectively added in the update $removedTags:tags effectively removed in the update $prevTags:tags that were present prior to the update $rc_id:recentchanges table id $rev_id:revision table id $log_id:logging table id $params:tag params $rc:RecentChange being tagged when the tagging accompanies the action, or null $user:User who performed the tagging when the tagging is subsequent to the action, or null 'ChangeTagsAllowedAdd':Called when checking if a user can add tags to a change. & $allowedTags:List of all the tags the user is allowed to add. Any tags the user wants to add( $addTags) that are not in this array will cause it to fail. You may add or remove tags to this array as required. $addTags:List of tags user intends to add. $user:User who is adding the tags. 'ChangeUserGroups':Called before user groups are changed. $performer:The User who will perform the change $user:The User whose groups will be changed & $add:The groups that will be added & $remove:The groups that will be removed 'Collation::factory':Called if $wgCategoryCollation is an unknown collation. $collationName:Name of the collation in question & $collationObject:Null. Replace with a subclass of the Collation class that implements the collation given in $collationName. 'ConfirmEmailComplete':Called after a user 's email has been confirmed successfully. $user:user(object) whose email is being confirmed 'ContentAlterParserOutput':Modify parser output for a given content object. Called by Content::getParserOutput after parsing has finished. Can be used for changes that depend on the result of the parsing but have to be done before LinksUpdate is called(such as adding tracking categories based on the rendered HTML). $content:The Content to render $title:Title of the page, as context $parserOutput:ParserOutput to manipulate 'ContentGetParserOutput':Customize parser output for a given content object, called by AbstractContent::getParserOutput. May be used to override the normal model-specific rendering of page content. $content:The Content to render $title:Title of the page, as context $revId:The revision ID, as context $options:ParserOptions for rendering. To avoid confusing the parser cache, the output can only depend on parameters provided to this hook function, not on global state. $generateHtml:boolean, indicating whether full HTML should be generated. If false, generation of HTML may be skipped, but other information should still be present in the ParserOutput object. & $output:ParserOutput, to manipulate or replace 'ContentHandlerDefaultModelFor':Called when the default content model is determined for a given title. May be used to assign a different model for that title. $title:the Title in question & $model:the model name. Use with CONTENT_MODEL_XXX constants. 'ContentHandlerForModelID':Called when a ContentHandler is requested for a given content model name, but no entry for that model exists in $wgContentHandlers. Note:if your extension implements additional models via this hook, please use GetContentModels hook to make them known to core. $modeName:the requested content model name & $handler:set this to a ContentHandler object, if desired. 'ContentModelCanBeUsedOn':Called to determine whether that content model can be used on a given page. This is especially useful to prevent some content models to be used in some special location. $contentModel:ID of the content model in question $title:the Title in question. & $ok:Output parameter, whether it is OK to use $contentModel on $title. Handler functions that modify $ok should generally return false to prevent further hooks from further modifying $ok. 'ContribsPager::getQueryInfo':Before the contributions query is about to run & $pager:Pager object for contributions & $queryInfo:The query for the contribs Pager 'ContribsPager::reallyDoQuery':Called before really executing the query for My Contributions & $data:an array of results of all contribs queries $pager:The ContribsPager object hooked into $offset:Index offset, inclusive $limit:Exact query limit $descending:Query direction, false for ascending, true for descending 'ContributionsLineEnding':Called before a contributions HTML line is finished $page:SpecialPage object for contributions & $ret:the HTML line $row:the DB row for this line & $classes:the classes to add to the surrounding< li > & $attribs:associative array of other HTML attributes for the< li > element. Currently only data attributes reserved to MediaWiki are allowed(see Sanitizer::isReservedDataAttribute). 'ContributionsToolLinks':Change tool links above Special:Contributions $id:User identifier $title:User page title & $tools:Array of tool links $specialPage:SpecialPage instance for context and services. Can be either SpecialContributions or DeletedContributionsPage. Extensions should type hint against a generic SpecialPage though. 'ConvertContent':Called by AbstractContent::convert when a conversion to another content model is requested. Handler functions that modify $result should generally return false to disable further attempts at conversion. $content:The Content object to be converted. $toModel:The ID of the content model to convert to. $lossy: boolean indicating whether lossy conversion is allowed. & $result:Output parameter, in case the handler function wants to provide a converted Content object. Note that $result->getContentModel() must return $toModel. 'ContentSecurityPolicyDefaultSource':Modify the allowed CSP load sources. This affects all directives except for the script directive. If you want to add a script source, see ContentSecurityPolicyScriptSource hook. & $defaultSrc:Array of Content-Security-Policy allowed sources $policyConfig:Current configuration for the Content-Security-Policy header $mode:ContentSecurityPolicy::REPORT_ONLY_MODE or ContentSecurityPolicy::FULL_MODE depending on type of header 'ContentSecurityPolicyDirectives':Modify the content security policy directives. Use this only if ContentSecurityPolicyDefaultSource and ContentSecurityPolicyScriptSource do not meet your needs. & $directives:Array of CSP directives $policyConfig:Current configuration for the CSP header $mode:ContentSecurityPolicy::REPORT_ONLY_MODE or ContentSecurityPolicy::FULL_MODE depending on type of header 'ContentSecurityPolicyScriptSource':Modify the allowed CSP script sources. Note that you also have to use ContentSecurityPolicyDefaultSource if you want non-script sources to be loaded from whatever you add. & $scriptSrc:Array of CSP directives $policyConfig:Current configuration for the CSP header $mode:ContentSecurityPolicy::REPORT_ONLY_MODE or ContentSecurityPolicy::FULL_MODE depending on type of header 'CustomEditor':When invoking the page editor Return true to allow the normal editor to be used, or false if implementing a custom editor, e.g. for a special namespace, etc. $article:Article being edited $user:User performing the edit 'DatabaseOraclePostInit':Called after initialising an Oracle database $db:the DatabaseOracle object 'DeletedContribsPager::reallyDoQuery':Called before really executing the query for Special:DeletedContributions Similar to ContribsPager::reallyDoQuery & $data:an array of results of all contribs queries $pager:The DeletedContribsPager object hooked into $offset:Index offset, inclusive $limit:Exact query limit $descending:Query direction, false for ascending, true for descending 'DeletedContributionsLineEnding':Called before a DeletedContributions HTML line is finished. Similar to ContributionsLineEnding $page:SpecialPage object for DeletedContributions & $ret:the HTML line $row:the DB row for this line & $classes:the classes to add to the surrounding< li > & $attribs:associative array of other HTML attributes for the< li > element. Currently only data attributes reserved to MediaWiki are allowed(see Sanitizer::isReservedDataAttribute). 'DeleteUnknownPreferences':Called by the cleanupPreferences.php maintenance script to build a WHERE clause with which to delete preferences that are not known about. This hook is used by extensions that have dynamically-named preferences that should not be deleted in the usual cleanup process. For example, the Gadgets extension creates preferences prefixed with 'gadget-', and so anything with that prefix is excluded from the deletion. &where:An array that will be passed as the $cond parameter to IDatabase::select() to determine what will be deleted from the user_properties table. $db:The IDatabase object, useful for accessing $db->buildLike() etc. 'DifferenceEngineAfterLoadNewText':called in DifferenceEngine::loadNewText() after the new revision 's content has been loaded into the class member variable $differenceEngine->mNewContent but before returning true from this function. $differenceEngine:DifferenceEngine object 'DifferenceEngineLoadTextAfterNewContentIsLoaded':called in DifferenceEngine::loadText() after the new revision 's content has been loaded into the class member variable $differenceEngine->mNewContent but before checking if the variable 's value is null. This hook can be used to inject content into said class member variable. $differenceEngine:DifferenceEngine object 'DifferenceEngineMarkPatrolledLink':Allows extensions to change the "mark as patrolled" link which is shown both on the diff header as well as on the bottom of a page, usually wrapped in a span element which has class="patrollink". $differenceEngine:DifferenceEngine object & $markAsPatrolledLink:The "mark as patrolled" link HTML(string) $rcid:Recent change ID(rc_id) for this change(int) 'DifferenceEngineMarkPatrolledRCID':Allows extensions to possibly change the rcid parameter. For example the rcid might be set to zero due to the user being the same as the performer of the change but an extension might still want to show it under certain conditions. & $rcid:rc_id(int) of the change or 0 $differenceEngine:DifferenceEngine object $change:RecentChange object $user:User object representing the current user 'DifferenceEngineNewHeader':Allows extensions to change the $newHeader variable, which contains information about the new revision, such as the revision 's author, whether the revision was marked as a minor edit or not, etc. $differenceEngine:DifferenceEngine object & $newHeader:The string containing the various #mw-diff-otitle[1-5] divs, which include things like revision author info, revision comment, RevisionDelete link and more $formattedRevisionTools:Array containing revision tools, some of which may have been injected with the DiffRevisionTools hook $nextlink:String containing the link to the next revision(if any) $status
Definition hooks.txt:1032
$data
Utility to generate mapping file used in mw.Title (phpCharToUpper.json)
The wiki should then use memcached to cache various data To use multiple just add more items to the array To increase the weight of a make its entry a array("192.168.0.1:11211", 2))
$params