Collaboration diagram for Block:

[legend]

Public Member Functions
	__construct ( $options=[])
	Create a new block with specified parameters on a user, IP or IP range.

	appliesToNamespace ( $ns)
	Checks if a block applies to a particular namespace.

	appliesToPage ( $pageId)
	Checks if a block applies to a particular page.

	appliesToPasswordReset ()
	Check if the block prevents a user from resetting their password.

	appliesToRight ( $right)
	Determine whether the Block prevents a given right.

	appliesToTitle (Title $title)
	Checks if a block applies to a particular title.

	appliesToUsertalk (Title $usertalk=null)
	Determine whether the block allows the user to edit their own user talk page.

	delete ()
	Delete the row from the IP blocks table.

	deleteIfExpired ()
	Check if a block has expired.

	doAutoblock ( $autoblockIP)
	Autoblocks the given IP, referring to this Block.

	equals (Block $block)
	Check if two blocks are effectively equal.

	fromMaster ( $x=null)
	Get/set a flag determining whether the master is used for reads.

	getBlocker ()
	Get the user who implemented this block.

	getBlockErrorParams (IContextSource $context)
	Get block information used in different block error messages.

	getBy ()
	Get the user id of the blocking sysop.

	getByName ()
	Get the username of the blocking sysop.

	getCookieValue ()
	Get the BlockID cookie's value for this block.

	getExpiry ()
	Get the block expiry time.

	getHideName ()
	Get whether the block hides the target's username.

	getId ()
	Get the block ID.

	getPermissionsError (IContextSource $context)
	Get the key and parameters for the corresponding error message.

	getRangeEnd ()
	Get the IP address at the end of the range in Hex form.

	getRangeStart ()
	Get the IP address at the start of the range in Hex form.

	getReason ()
	Get the reason given for creating the block.

	getRedactedName ()
	Get the block name, but with autoblocked IPs hidden as per standard privacy policy.

	getRestrictions ()
	Get Restrictions.

	getSystemBlockType ()
	Get the system block type, if any.

	getTarget ()
	Get the target for this particular Block.

	getTargetAndType ()
	Get the target and target type for this particular Block.

	getTimestamp ()
	Get the timestamp indicating when the block was created.

	getType ()
	Get the type of target for this particular block.

	insert ( $dbw=null)
	Insert a block into the block table.

	isAutoblocking ( $x=null)

	isCreateAccountBlocked ( $x=null)
	Get or set the flag indicating whether this block blocks the target from creating an account.

	isEmailBlocked ( $x=null)
	Get or set the flag indicating whether this block blocks the target from sending emails.

	isExpired ()
	Has the block expired?

	isHardblock ( $x=null)
	Get/set whether the Block is a hardblock (affects logged-in users on a given IP/range)

	isSitewide ( $x=null)
	Indicates that the block is a sitewide block.

	isUsertalkEditAllowed ( $x=null)
	Get or set the flag indicating whether this block blocks the target from editing their own user talk page.

	isValid ()
	Is the block address valid (i.e.

	prevents ( $action, $x=null)
	Get/set whether the Block prevents a given action.

	setBlocker ( $user)
	Set the user who implemented (or will implement) this block.

	setCookie (WebResponse $response)
	Set the 'BlockID' cookie to this block's ID and expiry time.

	setExpiry ( $expiry)
	Set the block expiry time.

	setHideName ( $hideName)
	Set whether ths block hides the target's username.

	setReason ( $reason)
	Set the reason for creating the block.

	setRestrictions (array $restrictions)
	Set Restrictions.

	setTarget ( $target)
	Set the target for this block, and update $this->type accordingly.

	setTimestamp ( $timestamp)
	Set the timestamp indicating when the block was created.

	shouldTrackWithCookie ( $isIpUser)
	Check if the block should be tracked with a cookie.

	update ()
	Update a block in the DB with new parameters.

	updateTimestamp ()
	Update the timestamp on autoblocks.

Static Public Member Functions
static	chooseBlock (array $blocks, array $ipChain)
	From a list of multiple blocks, find the most exact and strongest Block.

static	clearCookie (WebResponse $response)
	Unset the 'BlockID' cookie.

static	getAutoblockExpiry ( $timestamp)
	Get a timestamp of the expiry for autoblocks.

static	getBlocksForIPList (array $ipChain, $isAnon, $fromMaster=false)
	Get all blocks that match any IP from an array of IP addresses.

static	getIdFromCookieValue ( $cookieValue)
	Get the stored ID from the 'BlockID' cookie.

static	getQueryInfo ()
	Return the tables, fields, and join conditions to be selected to create a new block object.

static	getRangeCond ( $start, $end=null)
	Get a set of SQL conditions which will select rangeblocks encompassing a given range.

static	isWhitelistedFromAutoblocks ( $ip)
	Checks whether a given IP is on the autoblock whitelist.

static	newFromID ( $id)
	Load a block from the block id.

static	newFromRow ( $row)
	Create a new Block object from a database row.

static	newFromTarget ( $specificTarget, $vagueTarget=null, $fromMaster=false)
	Given a target and the target's type, get an existing Block object if possible.

static	parseTarget ( $target)
	From an existing Block, get the target and the type of target.

static	purgeExpired ()
	Purge expired blocks from the ipblocks table.

static	selectFields ()
	Return the list of ipblocks fields that should be selected to create a new block.

Public Attributes
bool	$mAuto

string	$mExpiry

bool	$mHideName

int	$mParentBlockId

string	$mReason

string	$mTimestamp

const	TYPE_AUTO = 4

const	TYPE_ID = 5

const	TYPE_IP = 2

const	TYPE_RANGE = 3

const	TYPE_USER = 1

Protected Member Functions
	doRetroactiveAutoblock ()
	Retroactively autoblocks the last IP used by the user (if it is a user) blocked by this Block.

	getAutoblockUpdateArray (IDatabase $dbw)

	getDatabaseArray (IDatabase $dbw)
	Get an array suitable for passing to $dbw->insert() or $dbw->update()

	initFromRow ( $row)
	Given a database row from the ipblocks table, initialize member variables.

	newLoad ( $vagueTarget=null)
	Load a block from the database which affects the already-set $this->target: 1) A block directly on the given user or IP 2) A rangeblock encompassing the given IP (smallest first) 3) An autoblock on the given IP.

Static Protected Member Functions
static	defaultRetroactiveAutoblock (Block $block, array &$blockIds)
	Retroactively autoblocks the last IP used by the user (if it is a user) blocked by this Block.

static	getIpFragment ( $hex)
	Get the component of an IP address which is certain to be the same between an IP address and a rangeblock containing that IP address.

Private Member Functions
	findRestriction ( $type, $value)
	Find Restriction by type and value.

	getBlockRestrictionStore ()
	Get a BlockRestrictionStore instance.

	setId ( $blockId)
	Set the block ID.

Private Attributes
bool	$allowUsertalk

bool	$blockCreateAccount

User	$blocker

int	$forcedTargetID
	Hack for foreign blocking (CentralAuth)

bool	$isAutoblocking

bool	$isHardblock

bool	$isSitewide

bool	$mBlockEmail

bool	$mFromMaster

int	$mId

Restriction[]	$restrictions

string null	$systemBlockType

User string	$target

int	$type
	Block::TYPE_ constant.

Detailed Description

Definition at line 31 of file Block.php.

Constructor & Destructor Documentation

◆ __construct()

Block::__construct ( $options = [] )

Create a new block with specified parameters on a user, IP or IP range.

Parameters

array $options Parameters of the block: address string|User Target user name, User object, IP address or IP range user int Override target user ID (for foreign users) by int User ID of the blocker reason string Reason of the block timestamp string The time at which the block comes into effect auto bool Is this an automatic block? expiry string Timestamp of expiration of the block or 'infinity' anonOnly bool Only disallow anonymous actions createAccount bool Disallow creation of new accounts enableAutoblock bool Enable automatic blocking hideName bool Hide the target user name blockEmail bool Disallow sending emails allowUsertalk bool Allow the target to edit its own talk page byText string Username of the blocker (for foreign users) systemBlock string Indicate that this block is automatically created by MediaWiki rather than being stored in the database. Value is a string to return from self::getSystemBlockType(). sitewide bool Disallow editing all pages and all contribution actions, except those specifically allowed by other block flags

Since: 1.26 accepts $options array instead of individual parameters; order of parameters above reflects the original order

Definition at line 131 of file Block.php.

References $options, and(), DB_REPLICA, isAutoblocking(), isCreateAccountBlocked(), isEmailBlocked(), isHardblock(), isSitewide(), isUsertalkEditAllowed(), User\newFromId(), setBlocker(), setExpiry(), setHideName(), setReason(), setTarget(), setTimestamp(), wfGetDB(), and wfTimestamp().

Member Function Documentation

◆ appliesToNamespace()

Block::appliesToNamespace ( $ns )

Checks if a block applies to a particular namespace.

Since: 1.33

Parameters

int $ns

Returns: bool

Definition at line 2066 of file Block.php.

References and(), findRestriction(), and isSitewide().

Referenced by appliesToUsertalk().

◆ appliesToPage()

Block::appliesToPage ( $pageId )

Checks if a block applies to a particular page.

This check does not consider whether $this->isUsertalkEditAllowed returns false, as the identity of the user making the hypothetical edit isn't known here (particularly in the case of IP hardblocks, range blocks, and auto-blocks).

Since: 1.33

Parameters

int $pageId

Returns: bool

Definition at line 2094 of file Block.php.

References and(), findRestriction(), and isSitewide().

Referenced by appliesToUsertalk().

◆ appliesToPasswordReset()

Block::appliesToPasswordReset ( )

Check if the block prevents a user from resetting their password.

Since: 1.33

Returns: bool The block blocks password reset

Definition at line 2157 of file Block.php.

References getSystemBlockType(), and isCreateAccountBlocked().

◆ appliesToRight()

Block::appliesToRight ( $right )

Determine whether the Block prevents a given right.

A right may be blacklisted or whitelisted, or determined from a property on the Block object. For certain rights, the property may be overridden according to global configs.

Since: 1.33

Parameters

string $right Right to check

Returns: bool|null null if unrecognized right or unset property

Definition at line 1231 of file Block.php.

References $res, User\isAllowed(), isCreateAccountBlocked(), isEmailBlocked(), and isSitewide().

Referenced by User\isBlocked(), and User\isBlockedFromCreateAccount().

◆ appliesToTitle()

Block::appliesToTitle ( Title $title )

Checks if a block applies to a particular title.

This check does not consider whether $this->isUsertalkEditAllowed returns false, as the identity of the user making the hypothetical edit isn't known here (particularly in the case of IP hardblocks, range blocks, and auto-blocks).

Parameters

Title $title

Returns: bool

Definition at line 2043 of file Block.php.

References getRestrictions(), and isSitewide().

◆ appliesToUsertalk()

Block::appliesToUsertalk ( Title $usertalk = null )

Determine whether the block allows the user to edit their own user talk page.

This is done separately from Block::appliesToRight because there is no right for editing one's own user talk page and because the user's talk page needs to be passed into the Block object, which is unaware of the user.

The ipb_allow_usertalk flag (which corresponds to the property allowUsertalk) is used on sitewide blocks and partial blocks that contain a namespace restriction on the user talk namespace, but do not contain a page restriction on the user's talk page. For all other (i.e. most) partial blocks, the flag is ignored, and the user can always edit their user talk page unless there is a page restriction on their user talk page, in which case they can never edit it. (Ideally the flag would be stored as null in these cases, but the database field isn't nullable.)

This method does not validate that the passed in talk page belongs to the block target since the target (an IP) might not be the same as the user's talk page (if they are logged in).

Since: 1.33

Parameters

Title | null $usertalk The user's user talk page. If null, and if the target is a User, the target's userpage is used

Returns: bool The user can edit their talk page

Definition at line 1997 of file Block.php.

References appliesToNamespace(), appliesToPage(), isSitewide(), isUsertalkEditAllowed(), and NS_USER_TALK.

◆ chooseBlock()

static Block::chooseBlock	(	array	$blocks,
		array	$ipChain )

static

From a list of multiple blocks, find the most exact and strongest Block.

The logic for finding the "best" block is:

Blocks that match the block's target IP are preferred over ones in a range
Hardblocks are chosen over softblocks that prevent account creation
Softblocks that prevent account creation are chosen over other softblocks
Other softblocks are chosen over autoblocks
If there are multiple exact or range blocks at the same level, the one chosen is random This should be used when $blocks where retrieved from the user's IP address and $ipChain is populated from the same IP address information.

Parameters

array	$blocks	Array of Block objects
array	$ipChain	List of IPs (strings). This is used to determine how "close" a block is to the server, and if a block matches exactly, or is in a range. The order is furthest from the server to nearest e.g., (Browser, proxy1, proxy2, local-squid, ...)

Exceptions

MWException

Returns: Block|null The "best" block from the list

Definition at line 1523 of file Block.php.

References and(), and false.

Referenced by User\getBlockedStatus(), and BlockTest\testBlocksOnXff().

◆ clearCookie()

static Block::clearCookie ( WebResponse $response )

static

Unset the 'BlockID' cookie.

Since: 1.29

Parameters

WebResponse $response The response on which to unset the cookie.

Definition at line 1815 of file Block.php.

References $response.

Referenced by User\getBlockFromCookieValue().

◆ defaultRetroactiveAutoblock()

static Block::defaultRetroactiveAutoblock	(	Block	$block,
		array &	$blockIds )

staticprotected

Retroactively autoblocks the last IP used by the user (if it is a user) blocked by this Block.

This will use the recentchanges table.

Parameters

Block	$block
array	&$blockIds

Definition at line 759 of file Block.php.

References $dbr, $options, $res, $target, $wgPutIPinRC, DB_REPLICA, doAutoblock(), getTarget(), getType(), wfDebug(), and wfGetDB().

Referenced by doRetroactiveAutoblock().

◆ delete()

Block::delete ( )

Delete the row from the IP blocks table.

Exceptions

MWException

Returns: bool

Definition at line 517 of file Block.php.

References DB_MASTER, getBlockRestrictionStore(), getId(), wfGetDB(), and wfReadOnly().

◆ deleteIfExpired()

Block::deleteIfExpired ( )

Check if a block has expired.

Delete it if it is.

Returns: bool

Definition at line 939 of file Block.php.

References and(), isExpired(), and wfDebug().

◆ doAutoblock()

Block::doAutoblock ( $autoblockIP )

Autoblocks the given IP, referring to this Block.

Parameters

string $autoblockIP The IP to autoblock.

Returns: int|bool Block ID if an autoblock was inserted, false if not.

Definition at line 858 of file Block.php.

References $mId, and(), getBlocker(), getExpiry(), getHideName(), getReason(), getRestrictions(), getSystemBlockType(), getTarget(), isAutoblocking(), isCreateAccountBlocked(), isSitewide(), isUsertalkEditAllowed(), newFromTarget(), plain, wfDebug(), wfMessage(), and wfTimestampNow().

Referenced by defaultRetroactiveAutoblock().

◆ doRetroactiveAutoblock()

Block::doRetroactiveAutoblock ( )

protected

Retroactively autoblocks the last IP used by the user (if it is a user) blocked by this Block.

Returns: array Block IDs of retroactive autoblocks made

Definition at line 736 of file Block.php.

References and(), defaultRetroactiveAutoblock(), getTarget(), getType(), isAutoblocking(), and wfDebug().

Referenced by insert(), and update().

◆ equals()

Block::equals ( Block $block )

Check if two blocks are effectively equal.

Doesn't check irrelevant things like the blocking user or the block timestamp, only things which affect the blocked user

Parameters

Block $block

Returns: bool

Definition at line 292 of file Block.php.

References getExpiry(), getHideName(), getReason(), getRestrictions(), isAutoblocking(), isCreateAccountBlocked(), isEmailBlocked(), isHardblock(), isSitewide(), and isUsertalkEditAllowed().

◆ findRestriction()

Block::findRestriction	(		$type,
			$value )

private

Find Restriction by type and value.

Parameters

string	$type
int	$value

Returns: Restriction|null

Definition at line 2116 of file Block.php.

References $restrictions, $type, $value, and(), and getRestrictions().

Referenced by appliesToNamespace(), and appliesToPage().

◆ fromMaster()

Block::fromMaster ( $x = null )

Get/set a flag determining whether the master is used for reads.

Parameters

bool | null $x

Returns: bool

Definition at line 1137 of file Block.php.

References wfSetVar().

◆ getAutoblockExpiry()

static Block::getAutoblockExpiry ( $timestamp )

static

Get a timestamp of the expiry for autoblocks.

Parameters

string | int $timestamp

Returns: string

Definition at line 1350 of file Block.php.

References $wgAutoblockExpiry, and wfTimestamp().

◆ getAutoblockUpdateArray()

Block::getAutoblockUpdateArray ( IDatabase $dbw )

protected

Parameters

IDatabase $dbw

Returns: array

Definition at line 720 of file Block.php.

References and(), getBlocker(), getHideName(), getReason(), isCreateAccountBlocked(), isSitewide(), and isUsertalkEditAllowed().

Referenced by update().

◆ getBlocker()

Block::getBlocker ( )

Get the user who implemented this block.

Returns: User User object. May name a foreign user.

Definition at line 1761 of file Block.php.

References $blocker.

Referenced by doAutoblock(), getAutoblockUpdateArray(), getBlockErrorParams(), getBy(), getByName(), getDatabaseArray(), and insert().

◆ getBlockErrorParams()

Block::getBlockErrorParams ( IContextSource $context )

Get block information used in different block error messages.

Since: 1.33

Parameters

IContextSource $context

Returns: array

Definition at line 1902 of file Block.php.

References $blocker, $context, $lang, $link, $systemBlockType, getBlocker(), getByName(), getExpiry(), getId(), IContextSource\getLanguage(), getReason(), getSystemBlockType(), getTarget(), User\getUserPage(), and string.

Referenced by getPermissionsError().

◆ getBlockRestrictionStore()

Block::getBlockRestrictionStore ( )

private

Get a BlockRestrictionStore instance.

Returns: BlockRestrictionStore

Definition at line 2177 of file Block.php.

Referenced by delete(), getRestrictions(), insert(), setId(), and update().

◆ getBlocksForIPList()

static Block::getBlocksForIPList	(	array	$ipChain,
			$isAnon,
			$fromMaster = false )

static

Get all blocks that match any IP from an array of IP addresses.

Parameters

array	$ipChain	List of IPs (strings), usually retrieved from the X-Forwarded-For header of the request
bool	$isAnon	Exclude anonymous-only blocks if false
bool	$fromMaster	Whether to query the master or replica DB

Returns: array Array of Blocks

Since: 1.22

Definition at line 1442 of file Block.php.

References $rows, and(), DB_MASTER, DB_REPLICA, getQueryInfo(), getRangeCond(), LIST_OR, newFromRow(), and wfGetDB().

Referenced by User\getBlockedStatus(), and BlockTest\testBlocksOnXff().

◆ getBy()

Block::getBy ( )

Get the user id of the blocking sysop.

Returns: int (0 for foreign users)

Definition at line 1043 of file Block.php.

References getBlocker().

Referenced by ApiQueryUserInfo\getBlockInfo().

◆ getByName()

Block::getByName ( )

Get the username of the blocking sysop.

Returns: string

Definition at line 1052 of file Block.php.

References getBlocker().

Referenced by getBlockErrorParams(), and ApiQueryUserInfo\getBlockInfo().

◆ getCookieValue()

Block::getCookieValue ( )

Get the BlockID cookie's value for this block.

This is usually the block ID concatenated with an HMAC in order to avoid spoofing (T152951), but if wgSecretKey is not set will just be the block ID.

Since: 1.29

Returns: string The block ID, probably concatenated with "!" and the HMAC.

Definition at line 1828 of file Block.php.

References and(), getId(), and MWCryptHash\hmac().

Referenced by setCookie().

◆ getDatabaseArray()

Block::getDatabaseArray ( IDatabase $dbw )

protected

Get an array suitable for passing to $dbw->insert() or $dbw->update()

Parameters

IDatabase $dbw

Returns: array

Definition at line 685 of file Block.php.

References $forcedTargetID, $mParentBlockId, and(), Wikimedia\Rdbms\IDatabase\encodeExpiry(), getBlocker(), getExpiry(), getHideName(), User\getId(), getRangeEnd(), getRangeStart(), getReason(), isAutoblocking(), isCreateAccountBlocked(), isEmailBlocked(), isHardblock(), isSitewide(), isUsertalkEditAllowed(), string, and Wikimedia\Rdbms\IDatabase\timestamp().

Referenced by insert(), and update().

◆ getExpiry()

Block::getExpiry ( )

Get the block expiry time.

Since: 1.19

Returns: string

Definition at line 1715 of file Block.php.

References $mExpiry.

Referenced by doAutoblock(), equals(), getBlockErrorParams(), ApiQueryUserInfo\getBlockInfo(), getDatabaseArray(), isExpired(), and setCookie().

◆ getHideName()

Block::getHideName ( )

Get whether the block hides the target's username.

Since: 1.33

Returns: bool The block hides the username

Definition at line 1108 of file Block.php.

References $mHideName.

Referenced by doAutoblock(), equals(), getAutoblockUpdateArray(), and getDatabaseArray().

◆ getId()

Block::getId ( )

Get the block ID.

Returns: int

Definition at line 1060 of file Block.php.

References $mId.

Referenced by delete(), getBlockErrorParams(), ApiQueryUserInfo\getBlockInfo(), getCookieValue(), and update().

◆ getIdFromCookieValue()

static Block::getIdFromCookieValue ( $cookieValue )

static

Get the stored ID from the 'BlockID' cookie.

The cookie's value is usually a combination of the ID and a HMAC (see Block::setCookie), but will sometimes only be the ID.

Since: 1.29

Parameters

string $cookieValue The string in which to find the ID.

Returns: int|null The block ID, or null if the HMAC is present and invalid.

Definition at line 1851 of file Block.php.

References and(), false, and MWCryptHash\hmac().

Referenced by User\getBlockFromCookieValue(), and UserTest\testAutoblockCookies().

◆ getIpFragment()

static Block::getIpFragment ( $hex )

staticprotected

Get the component of an IP address which is certain to be the same between an IP address and a rangeblock containing that IP address.

Parameters

string $hex Hexadecimal IP representation

Returns: string

Definition at line 456 of file Block.php.

References $wgBlockCIDRLimit, and and().

Referenced by getRangeCond().

◆ getPermissionsError()

Block::getPermissionsError ( IContextSource $context )

Get the key and parameters for the corresponding error message.

Since: 1.22

Parameters

IContextSource $context

Returns: array

Definition at line 1878 of file Block.php.

References $params, and(), getBlockErrorParams(), getSystemBlockType(), and isSitewide().

Referenced by UserBlockedError\__construct().

◆ getQueryInfo()

static Block::getQueryInfo ( )

static

Return the tables, fields, and join conditions to be selected to create a new block object.

Since: 1.31

Returns

array With three keys:

tables: (string[]) to include in the $table to IDatabase->select()
fields: (string[]) to include in the $vars to IDatabase->select()
joins: (array) to include in the $join_conds to IDatabase->select()

Definition at line 260 of file Block.php.

Referenced by CleanupBlocks\execute(), getBlocksForIPList(), newFromID(), newLoad(), and BlockTest\testNewFromRow().

◆ getRangeCond()

static Block::getRangeCond	(		$start,
			$end = null )

static

Get a set of SQL conditions which will select rangeblocks encompassing a given range.

Parameters

string	$start	Hexadecimal IP representation
string \| null	$end	Hexadecimal IP representation, or null to use $start = $end

Returns: string

Definition at line 423 of file Block.php.

References $dbr, DB_REPLICA, getIpFragment(), LIST_AND, and wfGetDB().

Referenced by SpecialBlockList\getBlockListPager(), getBlocksForIPList(), and newLoad().

◆ getRangeEnd()

Block::getRangeEnd ( )

Get the IP address at the end of the range in Hex form.

Exceptions

MWException

Returns: string IP in Hex form

Definition at line 1024 of file Block.php.

References list, type, TYPE_IP, TYPE_RANGE, and TYPE_USER.

Referenced by getDatabaseArray().

◆ getRangeStart()

Block::getRangeStart ( )

Get the IP address at the start of the range in Hex form.

Exceptions

MWException

Returns: string IP in Hex form

Definition at line 1005 of file Block.php.

References list, type, TYPE_IP, TYPE_RANGE, and TYPE_USER.

Referenced by getDatabaseArray().

◆ getReason()

Block::getReason ( )

Get the reason given for creating the block.

Since: 1.33

Returns: string

Definition at line 1088 of file Block.php.

References $mReason.

Referenced by doAutoblock(), equals(), getAutoblockUpdateArray(), getBlockErrorParams(), ApiQueryUserInfo\getBlockInfo(), and getDatabaseArray().

◆ getRedactedName()

Block::getRedactedName ( )

Get the block name, but with autoblocked IPs hidden as per standard privacy policy.

Returns: string Text is escaped

Definition at line 1332 of file Block.php.

References and(), getTarget(), text, and wfMessage().

◆ getRestrictions()

Block::getRestrictions ( )

Get Restrictions.

Getting the restrictions will perform a database query if the restrictions are not already loaded.

Since: 1.33

Returns: Restriction[]

Definition at line 1943 of file Block.php.

References $restrictions, and getBlockRestrictionStore().

Referenced by appliesToTitle(), doAutoblock(), equals(), and findRestriction().

◆ getSystemBlockType()

Block::getSystemBlockType ( )

Get the system block type, if any.

Since: 1.29

Returns: string|null

Definition at line 1127 of file Block.php.

References $systemBlockType.

Referenced by appliesToPasswordReset(), doAutoblock(), getBlockErrorParams(), ApiQueryUserInfo\getBlockInfo(), getPermissionsError(), and insert().

◆ getTarget()

Block::getTarget ( )

Get the target for this particular Block.

Note that for autoblocks, this returns the unredacted name; frontend functions need to call $block->getRedactedName() in this situation.

Returns: User|string

Definition at line 1705 of file Block.php.

References $target.

Referenced by defaultRetroactiveAutoblock(), doAutoblock(), doRetroactiveAutoblock(), getBlockErrorParams(), getRedactedName(), getTargetAndType(), and isValid().

◆ getTargetAndType()

Block::getTargetAndType ( )

Get the target and target type for this particular Block.

Note that for autoblocks, this returns the unredacted name; frontend functions need to call $block->getRedactedName() in this situation.

Returns: array [ User|String, Block::TYPE_ constant ]

Todo: FIXME: This should be an integral part of the Block member variables

Definition at line 1695 of file Block.php.

References getTarget(), and getType().

◆ getTimestamp()

Block::getTimestamp ( )

Get the timestamp indicating when the block was created.

Since: 1.33

Returns: string

Definition at line 1735 of file Block.php.

References $mTimestamp.

Referenced by ApiQueryUserInfo\getBlockInfo(), and updateTimestamp().

◆ getType()

Block::getType ( )

Get the type of target for this particular block.

Autoblocks have whichever type corresponds to their target, so to detect if a block is an autoblock, we have to check the mAuto property instead.

Returns: int Block::TYPE_ constant, will never be TYPE_ID

Definition at line 1682 of file Block.php.

References $type, and TYPE_AUTO.

Referenced by defaultRetroactiveAutoblock(), ApiBase\dieBlocked(), doRetroactiveAutoblock(), getTargetAndType(), isAutoblocking(), isHardblock(), SpecialBlock\maybeAlterFormDefaults(), and shouldTrackWithCookie().

◆ initFromRow()

Block::initFromRow ( $row )

protected

Given a database row from the ipblocks table, initialize member variables.

Parameters

stdClass $row A row from the ipblocks table

Definition at line 470 of file Block.php.

References and(), DB_REPLICA, isAutoblocking(), isCreateAccountBlocked(), isEmailBlocked(), isHardblock(), isSitewide(), isUsertalkEditAllowed(), User\newFromAnyId(), setBlocker(), setExpiry(), setHideName(), setReason(), setTarget(), setTimestamp(), wfGetDB(), and wfTimestamp().

Referenced by newFromRow(), and newLoad().

◆ insert()

Block::insert ( $dbw = null )

Insert a block into the block table.

Will fail if there is a conflicting block (same name and options) already in the database.

Parameters

IDatabase | null $dbw If you have one available

Returns: bool|array False on failure, assoc array on success: ('id' => block ID, 'autoIds' => array of autoblock IDs)

Definition at line 545 of file Block.php.

References $mId, $wgBlockDisablesLogin, and(), DB_MASTER, doRetroactiveAutoblock(), getBlocker(), getBlockRestrictionStore(), getDatabaseArray(), getSystemBlockType(), purgeExpired(), setId(), wfDebug(), and wfGetDB().

◆ isAutoblocking()

Block::isAutoblocking ( $x = null )

Parameters

null | bool $x

Returns: bool

Definition at line 1159 of file Block.php.

References getType(), isAutoblocking(), and wfSetVar().

Referenced by __construct(), doAutoblock(), doRetroactiveAutoblock(), equals(), getDatabaseArray(), initFromRow(), isAutoblocking(), shouldTrackWithCookie(), and update().

◆ isCreateAccountBlocked()

Block::isCreateAccountBlocked ( $x = null )

Get or set the flag indicating whether this block blocks the target from creating an account.

(Note that the flag may be overridden depending on global configs.)

Since: 1.33

Parameters

null | bool $x Value to set (if null, just get the property value)

Returns: bool Value of the property

Definition at line 1191 of file Block.php.

References wfSetVar().

Referenced by __construct(), appliesToPasswordReset(), appliesToRight(), doAutoblock(), equals(), getAutoblockUpdateArray(), getDatabaseArray(), and initFromRow().

◆ isEmailBlocked()

Block::isEmailBlocked ( $x = null )

Get or set the flag indicating whether this block blocks the target from sending emails.

(Note that the flag may be overridden depending on global configs.)

Since: 1.33

Parameters

null | bool $x Value to set (if null, just get the property value)

Returns: bool Value of the property

Definition at line 1204 of file Block.php.

References wfSetVar().

Referenced by __construct(), appliesToRight(), equals(), getDatabaseArray(), and initFromRow().

◆ isExpired()

Block::isExpired ( )

Has the block expired?

Returns: bool

Definition at line 956 of file Block.php.

References getExpiry(), wfDebug(), and wfTimestampNow().

Referenced by deleteIfExpired().

◆ isHardblock()

Block::isHardblock ( $x = null )

Get/set whether the Block is a hardblock (affects logged-in users on a given IP/range)

Parameters

bool | null $x

Returns: bool

Definition at line 1146 of file Block.php.

References $isHardblock, getType(), isHardblock(), true, and wfSetVar().

Referenced by __construct(), equals(), getDatabaseArray(), initFromRow(), and isHardblock().

◆ isSitewide()

Block::isSitewide ( $x = null )

Indicates that the block is a sitewide block.

This means the user is prohibited from editing any page on the site (other than their own talk page).

Since: 1.33

Parameters

null | bool $x

Returns: bool

Definition at line 1178 of file Block.php.

References isSitewide(), and wfSetVar().

Referenced by __construct(), appliesToNamespace(), appliesToPage(), appliesToRight(), appliesToTitle(), appliesToUsertalk(), ApiBase\dieBlocked(), doAutoblock(), equals(), getAutoblockUpdateArray(), ApiQueryUserInfo\getBlockInfo(), getDatabaseArray(), getPermissionsError(), initFromRow(), isSitewide(), SpecialBlock\maybeAlterFormDefaults(), and prevents().

◆ isUsertalkEditAllowed()

Block::isUsertalkEditAllowed ( $x = null )

Get or set the flag indicating whether this block blocks the target from editing their own user talk page.

(Note that the flag may be overridden depending on global configs.)

Since: 1.33

Parameters

null | bool $x Value to set (if null, just get the property value)

Returns: bool Value of the property

Definition at line 1217 of file Block.php.

References wfSetVar().

Referenced by __construct(), appliesToUsertalk(), doAutoblock(), equals(), getAutoblockUpdateArray(), getDatabaseArray(), initFromRow(), and prevents().

◆ isValid()

Block::isValid ( )

Is the block address valid (i.e.

not a null string?)

Deprecated: since 1.33 No longer needed in core.

Returns: bool

Definition at line 973 of file Block.php.

References getTarget(), and wfDeprecated().

◆ isWhitelistedFromAutoblocks()

static Block::isWhitelistedFromAutoblocks ( $ip )

static

Checks whether a given IP is on the autoblock whitelist.

TODO: this probably belongs somewhere else, but not sure where...

Parameters

string $ip The IP to check

Returns: bool

Definition at line 812 of file Block.php.

References $cache, $line, $lines, and(), array(), DB_REPLICA, function, plain, wfDebug(), wfGetDB(), and wfMessage().

◆ newFromID()

static Block::newFromID ( $id )

static

Load a block from the block id.

Parameters

int $id Block id to search for

Returns: Block|null

Definition at line 192 of file Block.php.

References $dbr, $res, DB_REPLICA, getQueryInfo(), newFromRow(), and wfGetDB().

Referenced by User\getBlockFromCookieValue(), newFromTarget(), ApiUnblockTest\setUp(), BlockTest\testCrappyCrossWikiBlocks(), BlockTest\testINewFromIDReturnsCorrectBlock(), and BlockTest\testRestrictionsFromDatabase().

◆ newFromRow()

static Block::newFromRow ( $row )

static

Create a new Block object from a database row.

Parameters

stdClass $row Row from the ipblocks table

Returns: Block

Definition at line 505 of file Block.php.

References initFromRow().

Referenced by CleanupBlocks\execute(), getBlocksForIPList(), newFromID(), newLoad(), and BlockTest\testNewFromRow().

◆ newFromTarget()

static Block::newFromTarget	(	$specificTarget,
		$vagueTarget = null,
		$fromMaster = false )

static

Given a target and the target's type, get an existing Block object if possible.

Parameters

string \| User \| int	$specificTarget	A block target, which may be one of several types: A user to block, in which case $target will be a User An IP to block, in which case $target will be a User generated by using User::newFromName( $ip, false ) to turn off name validation An IP range, in which case $target will be a String "123.123.123.123/18" etc The ID of an existing block, in the format "#12345" (since pure numbers are valid usernames Calling this with a user, IP address or range will not select autoblocks, and will only select a block where the targets match exactly (so looking for blocks on 1.2.3.4 will not select 1.2.0.0/16 or even 1.2.3.4/32)
string \| User \| int \| null	$vagueTarget	As above, but we will search for any block which affects that target (so for an IP address, get ranges containing that IP; and also get any relevant autoblocks). Leave empty or blank to skip IP-based lookups.
bool	$fromMaster	Whether to use the DB_MASTER database

Returns: Block|null (null if no relevant block could be found). The target and type of the returned Block will refer to the actual block which was found, which might not be the same as the target you gave if you used $vagueTarget!

Definition at line 1403 of file Block.php.

References $target, $type, and(), list, newFromID(), and parseTarget().

Referenced by BlockTest\addBlockForUser(), SpecialContributions\contributionsSub(), doAutoblock(), ApiBlockTest\doBlock(), SpecialUnblock\execute(), ApiBlock\execute(), ApiUnblock\execute(), User\getBlockedStatus(), ApiUnblockTest\getBlockFromParams(), Article\getRobotPolicy(), DeletedContributionsPage\getSubTitle(), User\isBlockedFromCreateAccount(), SpecialBlock\maybeAlterFormDefaults(), SpecialBlock\processForm(), EditPage\showIntro(), Article\showMissingArticle(), User\spreadBlock(), BlockTest\testBlockedUserCanNotCreateAccount(), ApiBlockTest\testBlockWithoutRestrictions(), ApiBlockTest\testBlockWithRestrictions(), BlockTest\testCrappyCrossWikiBlocks(), ApiEditPageTest\testEditWhileBlocked(), BlockTest\testINewFromTargetReturnsCorrectBlock(), SpecialBlockTest\testMaybeAlterFormDefaults(), SpecialBlockTest\testMaybeAlterFormDefaultsPartial(), ApiMoveTest\testMoveWhileBlocked(), SpecialBlockTest\testProcessForm(), SpecialBlockTest\testProcessFormExisting(), SpecialBlockTest\testProcessFormRestrictions(), SpecialBlockTest\testProcessFormRestrictionsChange(), and BlockTest\testT31116NewFromTargetWithEmptyIp().

◆ newLoad()

Block::newLoad ( $vagueTarget = null )

protected

Load a block from the database which affects the already-set $this->target: 1) A block directly on the given user or IP 2) A rangeblock encompassing the given IP (smallest first) 3) An autoblock on the given IP.

Parameters

User | string | null $vagueTarget Also search for blocks affecting this target. Doesn't make any sense to use TYPE_AUTO / TYPE_ID here. Leave blank to skip IP lookups.

Exceptions

MWException

Returns: bool Whether a relevant block was found

Definition at line 324 of file Block.php.

References $res, $target, $type, and(), DB_MASTER, DB_REPLICA, getQueryInfo(), getRangeCond(), initFromRow(), list, LIST_OR, newFromRow(), parseTarget(), string, type, TYPE_IP, TYPE_RANGE, TYPE_USER, and wfGetDB().

◆ parseTarget()

static Block::parseTarget ( $target )

static

From an existing Block, get the target and the type of target.

Note that, except for null, it is always safe to treat the target as a string; for User objects this will return User::__toString() which in turn gives User::getName().

Parameters

string | int | User | null $target

Returns: array [ User|String|null, Block::TYPE_ constant|null ]

Definition at line 1625 of file Block.php.

References $target, and(), User\getName(), User\newFromName(), null, TYPE_AUTO, TYPE_IP, TYPE_RANGE, and TYPE_USER.

Referenced by BlockListPager\formatValue(), SpecialBlockList\getBlockListPager(), SpecialBlock\getTargetAndType(), newFromTarget(), newLoad(), SpecialBlock\setParameter(), and setTarget().

◆ prevents()

Block::prevents	(		$action,
			$x = null )

Get/set whether the Block prevents a given action.

Deprecated: since 1.33, use appliesToRight to determine block behaviour, and specific methods to get/set properties

Parameters

string	$action	Action to check
bool \| null	$x	Value for set, or null to just get value

Returns: bool|null Null for unrecognized rights.

Definition at line 1277 of file Block.php.

References $res, and(), User\isAllowed(), isSitewide(), isUsertalkEditAllowed(), and wfSetVar().

◆ purgeExpired()

static Block::purgeExpired ( )

static

Purge expired blocks from the ipblocks table.

Definition at line 1359 of file Block.php.

References $fname, Wikimedia\Rdbms\IDatabase\addQuotes(), DB_MASTER, Wikimedia\Rdbms\IDatabase\delete(), Wikimedia\Rdbms\IDatabase\selectFieldValues(), Wikimedia\Rdbms\IDatabase\timestamp(), wfGetDB(), and wfReadOnly().

Referenced by insert().

◆ selectFields()

static Block::selectFields ( )

static

Return the list of ipblocks fields that should be selected to create a new block.

Deprecated: since 1.31, use self::getQueryInfo() instead.

Returns: array

Definition at line 216 of file Block.php.

References $wgActorTableSchemaMigrationStage, SCHEMA_COMPAT_READ_NEW, and wfDeprecated().

◆ setBlocker()

Block::setBlocker ( $user )

Set the user who implemented (or will implement) this block.

Parameters

User | string $user Local User object or username string

Definition at line 1769 of file Block.php.

References $user, and(), User\isUsableName(), and User\newFromName().

Referenced by __construct(), and initFromRow().

◆ setCookie()

Block::setCookie ( WebResponse $response )

Set the 'BlockID' cookie to this block's ID and expiry time.

The cookie's expiry will be the same as the block's, to a maximum of 24 hours.

Since: 1.29

Parameters

WebResponse $response The response on which to set the cookie.

Definition at line 1791 of file Block.php.

References $expiryTime, and(), false, getCookieValue(), getExpiry(), WebResponse\setCookie(), and wfTimestamp().

◆ setExpiry()

Block::setExpiry ( $expiry )

Set the block expiry time.

Since: 1.33

Parameters

string $expiry

Definition at line 1725 of file Block.php.

Referenced by __construct(), initFromRow(), and updateTimestamp().

◆ setHideName()

Block::setHideName ( $hideName )

Set whether ths block hides the target's username.

Since: 1.33

Parameters

bool $hideName The block hides the username

Definition at line 1118 of file Block.php.

References and().

Referenced by __construct(), and initFromRow().

◆ setId()

Block::setId ( $blockId )

private

Set the block ID.

Parameters

int $blockId

Returns: int

Definition at line 1070 of file Block.php.

References and(), and getBlockRestrictionStore().

Referenced by insert().

◆ setReason()

Block::setReason ( $reason )

Set the reason for creating the block.

Since: 1.33

Parameters

string $reason

Definition at line 1098 of file Block.php.

Referenced by __construct(), and initFromRow().

◆ setRestrictions()

Block::setRestrictions ( array $restrictions )

Set Restrictions.

Since: 1.33

Parameters

Restriction[] $restrictions

Returns: self

Definition at line 1963 of file Block.php.

References $restrictions, and and().

◆ setTarget()

Block::setTarget ( $target )

Set the target for this block, and update $this->type accordingly.

Parameters

mixed $target

Definition at line 1753 of file Block.php.

References list, parseTarget(), and type.

Referenced by __construct(), and initFromRow().

◆ setTimestamp()

Block::setTimestamp ( $timestamp )

Set the timestamp indicating when the block was created.

Since: 1.33

Parameters

string $timestamp

Definition at line 1745 of file Block.php.

Referenced by __construct(), initFromRow(), and updateTimestamp().

◆ shouldTrackWithCookie()

Block::shouldTrackWithCookie ( $isIpUser )

Check if the block should be tracked with a cookie.

Since: 1.33

Parameters

bool $isIpUser The user is logged out

Returns: bool The block should be tracked with a cookie

Definition at line 2138 of file Block.php.

References getType(), isAutoblocking(), TYPE_IP, TYPE_RANGE, and TYPE_USER.

◆ update()

Block::update ( )

Update a block in the DB with new parameters.

The ID field needs to be loaded first.

Returns: bool|array False on failure, array on success: ('id' => block ID, 'autoIds' => array of autoblock IDs)

Definition at line 622 of file Block.php.

References $mId, $result, $success, and(), DB_MASTER, doRetroactiveAutoblock(), getAutoblockUpdateArray(), getBlockRestrictionStore(), getDatabaseArray(), getId(), isAutoblocking(), wfDebug(), and wfGetDB().

◆ updateTimestamp()

Block::updateTimestamp ( )

Update the timestamp on autoblocks.

Definition at line 981 of file Block.php.

References DB_MASTER, getTimestamp(), setExpiry(), setTimestamp(), wfGetDB(), and wfTimestamp().

Member Data Documentation

◆ $allowUsertalk

bool Block::$allowUsertalk

private

Definition at line 60 of file Block.php.

◆ $blockCreateAccount

bool Block::$blockCreateAccount

private

Definition at line 63 of file Block.php.

◆ $blocker

User Block::$blocker

private

Definition at line 78 of file Block.php.

Referenced by getBlocker(), and getBlockErrorParams().

◆ $forcedTargetID

int Block::$forcedTargetID

private

Hack for foreign blocking (CentralAuth)

Definition at line 69 of file Block.php.

Referenced by getDatabaseArray().

◆ $isAutoblocking

bool Block::$isAutoblocking

private

Definition at line 84 of file Block.php.

◆ $isHardblock

bool Block::$isHardblock

private

Definition at line 81 of file Block.php.

Referenced by isHardblock().

◆ $isSitewide

bool Block::$isSitewide

private

Definition at line 90 of file Block.php.

◆ $mAuto

bool Block::$mAuto

Definition at line 39 of file Block.php.

◆ $mBlockEmail

bool Block::$mBlockEmail

private

Definition at line 57 of file Block.php.

◆ $mExpiry

string Block::$mExpiry

Definition at line 42 of file Block.php.

Referenced by getExpiry().

◆ $mFromMaster

bool Block::$mFromMaster

private

Definition at line 54 of file Block.php.

◆ $mHideName

bool Block::$mHideName

Definition at line 45 of file Block.php.

Referenced by getHideName().

◆ $mId

int Block::$mId

private

Definition at line 51 of file Block.php.

Referenced by doAutoblock(), getId(), insert(), and update().

◆ $mParentBlockId

int Block::$mParentBlockId

Definition at line 48 of file Block.php.

Referenced by getDatabaseArray().

◆ $mReason

string Block::$mReason

Definition at line 33 of file Block.php.

Referenced by getReason().

◆ $mTimestamp

string Block::$mTimestamp

Definition at line 36 of file Block.php.

Referenced by getTimestamp().

◆ $restrictions

Restriction [] Block::$restrictions

private

Definition at line 93 of file Block.php.

Referenced by findRestriction(), getRestrictions(), and setRestrictions().

◆ $systemBlockType

string null Block::$systemBlockType

private

Definition at line 87 of file Block.php.

Referenced by getBlockErrorParams(), and getSystemBlockType().

◆ $target

User string Block::$target

private

Definition at line 66 of file Block.php.

Referenced by defaultRetroactiveAutoblock(), getTarget(), newFromTarget(), newLoad(), and parseTarget().

◆ $type

int Block::$type

private

Block::TYPE_ constant.

After the block has been loaded from the database, this can only be USER, IP or RANGE.

Definition at line 75 of file Block.php.

Referenced by findRestriction(), getType(), newFromTarget(), and newLoad().

◆ TYPE_AUTO

const Block::TYPE_AUTO = 4

Definition at line 99 of file Block.php.

Referenced by SpecialContributions\contributionsSub(), ApiBase\dieBlocked(), SpecialUnblock\execute(), ApiUnblock\execute(), SpecialBlockList\getBlockListPager(), DeletedContributionsPage\getSubTitle(), getType(), SpecialBlock\maybeAlterFormDefaults(), parseTarget(), EditPage\showIntro(), and Article\showMissingArticle().

◆ TYPE_ID

const Block::TYPE_ID = 5

Definition at line 100 of file Block.php.

Referenced by SpecialUnblock\execute(), and SpecialBlockList\getBlockListPager().

◆ TYPE_IP

const Block::TYPE_IP = 2

Definition at line 97 of file Block.php.

Referenced by BlockTest\addXffBlocks(), SpecialUnblock\execute(), BlockListPager\formatValue(), User\getBlockFromCookieValue(), SpecialBlockList\getBlockListPager(), getRangeEnd(), getRangeStart(), newLoad(), parseTarget(), SpecialBlock\processForm(), shouldTrackWithCookie(), and SpecialBlock\validateTarget().

◆ TYPE_RANGE

const Block::TYPE_RANGE = 3

Definition at line 98 of file Block.php.

Referenced by BlockTest\addXffBlocks(), MediaWiki\Auth\AuthManager\checkAccountCreatePermissions(), SpecialContributions\contributionsSub(), SpecialUnblock\execute(), BlockListPager\formatValue(), User\getBlockFromCookieValue(), SpecialBlockList\getBlockListPager(), getRangeEnd(), getRangeStart(), DeletedContributionsPage\getSubTitle(), SpecialBlock\maybeAlterFormDefaults(), newLoad(), parseTarget(), SpecialBlock\processForm(), shouldTrackWithCookie(), MediaWiki\Auth\CheckBlocksSecondaryAuthenticationProvider\testUserForCreation(), and SpecialBlock\validateTarget().

◆ TYPE_USER

const Block::TYPE_USER = 1

Definition at line 96 of file Block.php.

Referenced by SpecialBlock\blockLogFlags(), SpecialUnblock\execute(), ApiBlock\execute(), BlockListPager\formatValue(), User\getBlockFromCookieValue(), SpecialBlockList\getBlockListPager(), getRangeEnd(), getRangeStart(), newLoad(), parseTarget(), SpecialBlock\processForm(), shouldTrackWithCookie(), UserTest\testAutoblockCookieInfiniteExpiry(), UserTest\testAutoblockCookies(), UserTest\testAutoblockCookiesDisabled(), and SpecialBlock\validateTarget().

The documentation for this class was generated from the following file:

includes/Block.php

Public Member Functions

Static Public Member Functions

Public Attributes

Protected Member Functions

Static Protected Member Functions

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ __construct()

Member Function Documentation

◆ appliesToNamespace()

◆ appliesToPage()

◆ appliesToPasswordReset()

◆ appliesToRight()

◆ appliesToTitle()

◆ appliesToUsertalk()

◆ chooseBlock()

◆ clearCookie()

◆ defaultRetroactiveAutoblock()

◆ delete()

◆ deleteIfExpired()

◆ doAutoblock()

◆ doRetroactiveAutoblock()

◆ equals()

◆ findRestriction()

◆ fromMaster()

◆ getAutoblockExpiry()

◆ getAutoblockUpdateArray()

◆ getBlocker()

◆ getBlockErrorParams()

◆ getBlockRestrictionStore()

◆ getBlocksForIPList()

◆ getBy()

◆ getByName()

◆ getCookieValue()

◆ getDatabaseArray()

◆ getExpiry()

◆ getHideName()

◆ getId()

◆ getIdFromCookieValue()

◆ getIpFragment()

◆ getPermissionsError()

◆ getQueryInfo()

◆ getRangeCond()

◆ getRangeEnd()

◆ getRangeStart()

◆ getReason()

◆ getRedactedName()

◆ getRestrictions()

◆ getSystemBlockType()

◆ getTarget()

◆ getTargetAndType()

◆ getTimestamp()

◆ getType()

◆ initFromRow()

◆ insert()

◆ isAutoblocking()

◆ isCreateAccountBlocked()

◆ isEmailBlocked()

◆ isExpired()

◆ isHardblock()

◆ isSitewide()

◆ isUsertalkEditAllowed()

◆ isValid()

◆ isWhitelistedFromAutoblocks()

◆ newFromID()

◆ newFromRow()

◆ newFromTarget()

◆ newLoad()

◆ parseTarget()

◆ prevents()

◆ purgeExpired()

◆ selectFields()

◆ setBlocker()

◆ setCookie()

◆ setExpiry()

◆ setHideName()

◆ setId()

◆ setReason()