MediaWiki REL1_39
FileBackendMultiWrite Class Reference

Proxy backend that mirrors writes to several internal backends. More...

Inheritance diagram for FileBackendMultiWrite:
Collaboration diagram for FileBackendMultiWrite:

Public Member Functions

 __construct (array $config)
 Construct a proxy backend that consists of several internal backends.
 
 accessibilityCheck (array $paths)
 Check that a set of file paths are usable across all internal backends.
 
 clearCache (array $paths=null)
 Invalidate any in-process file stat and property cache.
 
 concatenate (array $params)
 Concatenate a list of storage files into a single file system file.
 
 consistencyCheck (array $paths)
 Check that a set of files are consistent across all internal backends.
 
 directoryExists (array $params)
 Check if a directory exists at a given storage path.
 
 fileExists (array $params)
 Check if a file exists at a storage path in the backend.
 
 getDirectoryList (array $params)
 Get an iterator to list all directories under a storage directory.
 
 getFeatures ()
 Get the a bitfield of extra features supported by the backend medium.
 
 getFileContentsMulti (array $params)
 Like getFileContents() except it takes an array of storage paths and returns an order preserved map of storage paths to their content.
 
 getFileHttpUrl (array $params)
 Return an HTTP URL to a given file that requires no authentication to use.
 
 getFileList (array $params)
 Get an iterator to list all stored files under a storage directory.
 
 getFileProps (array $params)
 Get the properties of the content of the file at a storage path in the backend.
 
 getFileSha1Base36 (array $params)
 Get a SHA-1 hash of the content of the file at a storage path in the backend.
 
 getFileSize (array $params)
 Get the size (bytes) of a file at a storage path in the backend.
 
 getFileStat (array $params)
 Get quick information about a file at a storage path in the backend.
 
 getFileTimestamp (array $params)
 Get the last-modified timestamp of the file at a storage path.
 
 getFileXAttributes (array $params)
 Get metadata about a file at a storage path in the backend.
 
 getLocalCopyMulti (array $params)
 Like getLocalCopy() except it takes an array of storage paths and yields an order preserved-map of storage paths to temporary local file copies.
 
 getLocalReferenceMulti (array $params)
 Like getLocalReference() except it takes an array of storage paths and yields an order-preserved map of storage paths to temporary local file copies.
 
 getScopedLocksForOps (array $ops, StatusValue $status)
 Get an array of scoped locks needed for a batch of file operations.
 
 preloadCache (array $paths)
 Preload persistent file stat cache and property cache into in-process cache.
 
 preloadFileStat (array $params)
 Preload file stat information (concurrently if possible) into in-process cache.
 
 resyncFiles (array $paths, $resyncMode=true)
 Check that a set of files are consistent across all internal backends and re-synchronize those files against the "multi master" if needed.
 
 streamFile (array $params)
 Stream the content of the file at a storage path in the backend.
 
- Public Member Functions inherited from FileBackend
 clean (array $params)
 Delete a storage directory if it is empty.
 
 copy (array $params, array $opts=[])
 Performs a single copy operation.
 
 create (array $params, array $opts=[])
 Performs a single create operation.
 
 delete (array $params, array $opts=[])
 Performs a single delete operation.
 
 describe (array $params, array $opts=[])
 Performs a single describe operation.
 
 doOperation (array $op, array $opts=[])
 Same as doOperations() except it takes a single operation.
 
 doOperations (array $ops, array $opts=[])
 This is the main entry point into the backend for write operations.
 
 doQuickOperation (array $op, array $opts=[])
 Same as doQuickOperations() except it takes a single operation.
 
 doQuickOperations (array $ops, array $opts=[])
 Perform a set of independent file operations on some files.
 
 getContainerStoragePath ( $container)
 Get the storage path for the given container for this backend.
 
 getDomainId ()
 Get the domain identifier used for this backend (possibly empty).
 
 getFileContents (array $params)
 Get the contents of a file at a storage path in the backend.
 
 getLocalCopy (array $params)
 Get a local copy on disk of the file at a storage path in the backend.
 
 getLocalReference (array $params)
 Returns a file system file, identical in content to the file at a storage path.
 
 getName ()
 Get the unique backend name.
 
 getReadOnlyReason ()
 Get an explanatory message if this backend is read-only.
 
 getRootStoragePath ()
 Get the root storage path of this backend.
 
 getScopedFileLocks (array $paths, $type, StatusValue $status, $timeout=0)
 Lock the files at the given storage paths in the backend.
 
 getTopDirectoryList (array $params)
 Same as FileBackend::getDirectoryList() except only lists directories that are immediately under the given directory.
 
 getTopFileList (array $params)
 Same as FileBackend::getFileList() except only lists files that are immediately under the given directory.
 
 getWikiId ()
 Alias to getDomainId()
 
 hasFeatures ( $bitfield)
 Check if the backend medium supports a field of extra features.
 
 isReadOnly ()
 Check if this backend is read-only.
 
 lockFiles (array $paths, $type, $timeout=0)
 Lock the files at the given storage paths in the backend.
 
 move (array $params, array $opts=[])
 Performs a single move operation.
 
 prepare (array $params)
 Prepare a storage directory for usage.
 
 publish (array $params)
 Remove measures to block web access to a storage directory and the container it belongs to.
 
 quickCopy (array $params, array $opts=[])
 Performs a single quick copy operation.
 
 quickCreate (array $params, array $opts=[])
 Performs a single quick create operation.
 
 quickDelete (array $params, array $opts=[])
 Performs a single quick delete operation.
 
 quickDescribe (array $params, array $opts=[])
 Performs a single quick describe operation.
 
 quickMove (array $params, array $opts=[])
 Performs a single quick move operation.
 
 quickStore (array $params, array $opts=[])
 Performs a single quick store operation.
 
 secure (array $params)
 Take measures to block web access to a storage directory and the container it belongs to.
 
 setLogger (LoggerInterface $logger)
 
 store (array $params, array $opts=[])
 Performs a single store operation.
 
 unlockFiles (array $paths, $type)
 Unlock the files at the given storage paths in the backend.
 

Protected Member Functions

 doClean (array $params)
 
 doDirectoryOp ( $method, array $params)
 
 doOperationsInternal (array $ops, array $opts)
 
 doPrepare (array $params)
 
 doPublish (array $params)
 
 doQuickOperationsInternal (array $ops, array $opts)
 
 doSecure (array $params)
 
 fileStoragePathsForOps (array $ops)
 Get a list of file storage paths to read or write for a list of operations.
 
 getReadIndexFromParams (array $params)
 
 hasVolatileSources (array $ops)
 
 substOpBatchPaths (array $ops, FileBackendStore $backend)
 Substitute the backend name in storage path parameters for a set of operations with that of a given internal backend.
 
 substOpPaths (array $ops, FileBackendStore $backend)
 Same as substOpBatchPaths() but for a single operation.
 
 substPaths ( $paths, FileBackendStore $backend)
 Substitute the backend of storage paths with an internal backend's name.
 
 unsubstPaths ( $paths, FileBackendStore $backend)
 Substitute the backend of internal storage paths with the proxy backend's name.
 
- Protected Member Functions inherited from FileBackend
 newStatus (... $args)
 Yields the result of the status wrapper callback on either:
 
 resetOutputBuffer ()
 
 resolveFSFileObjects (array $ops)
 Convert FSFile 'src' paths to string paths (with an 'srcRef' field set to the FSFile)
 
 scopedProfileSection ( $section)
 
 wrapStatus (StatusValue $sv)
 

Protected Attributes

bool $asyncWrites = false
 
string bool $autoResync = false
 
FileBackendStore[] $backends = []
 Prioritized list of FileBackendStore objects.
 
int $masterIndex = -1
 Index of master backend.
 
int $readIndex = -1
 Index of read affinity backend.
 
int $syncChecks = 0
 Bitfield.
 
- Protected Attributes inherited from FileBackend
int $concurrency
 How many operations can be done in parallel.
 
string $domainId
 Unique domain name.
 
LockManager $lockManager
 
LoggerInterface $logger
 
string $name
 Unique backend name.
 
callable $obResetFunc
 
string $parallelize
 When to do operations in parallel.
 
callable null $profiler
 
string $readOnly
 Read-only explanation message.
 
callable $statusWrapper
 
callable $streamMimeFunc
 
TempFSFileFactory $tmpFileFactory
 

Additional Inherited Members

- Static Public Member Functions inherited from FileBackend
static extensionFromPath ( $path, $case='lowercase')
 Get the final extension from a storage or FS path.
 
static isPathTraversalFree ( $path)
 Check if a relative path has no directory traversals.
 
static isStoragePath ( $path)
 Check if a given path is a "mwstore://" path.
 
static makeContentDisposition ( $type, $filename='')
 Build a Content-Disposition header value per RFC 6266.
 
static normalizeStoragePath ( $storagePath)
 Normalize a storage path by cleaning up directory separators.
 
static parentStoragePath ( $storagePath)
 Get the parent storage directory of a storage path.
 
static splitStoragePath ( $storagePath)
 Split a storage path into a backend name, a container name, and a relative file path.
 
- Public Attributes inherited from FileBackend
const ATTR_HEADERS = 1
 Bitfield flags for supported features.
 
const ATTR_METADATA = 2
 
const ATTR_UNICODE_PATHS = 4
 
- Static Protected Member Functions inherited from FileBackend
static normalizeContainerPath ( $path)
 Validate and normalize a relative storage path.
 

Detailed Description

Proxy backend that mirrors writes to several internal backends.

This class defines a multi-write backend. Multiple backends can be registered to this proxy backend and it will act as a single backend. Use this when all access to those backends is through this proxy backend. At least one of the backends must be declared the "master" backend.

Only use this class when transitioning from one storage system to another.

Read operations are only done on the 'master' backend for consistency. Write operations are performed on all backends, starting with the master. This makes a best-effort to have transactional semantics, but since requests may sometimes fail, the use of "autoResync" or background scripts to fix inconsistencies is important.

Since
1.19

Definition at line 45 of file FileBackendMultiWrite.php.

Constructor & Destructor Documentation

◆ __construct()

FileBackendMultiWrite::__construct ( array $config)

Construct a proxy backend that consists of several internal backends.

Locking and read-only checks are handled by the proxy backend.

Additional $config params include:

  • backends : Array of backend config and multi-backend settings. Each value is the config used in the constructor of a FileBackendStore class, but with these additional settings:
    • class : The name of the backend class
    • isMultiMaster : This must be set for one backend.
    • readAffinity : Use this for reads without 'latest' set.
  • syncChecks : Integer bitfield of internal backend sync checks to perform. Possible bits include the FileBackendMultiWrite::CHECK_* constants. There are constants for SIZE, TIME, and SHA1. The checks are done before allowing any file operations.
  • autoResync : Automatically resync the clone backends to the master backend when pre-operation sync checks fail. This should only be used if the master backend is stable and not missing any files. Use "conservative" to limit resyncing to copying newer master backend files over older (or non-existing) clone backend files. Cases that cannot be handled will result in operation abortion.
  • replication : Set to 'async' to defer file operations on the non-master backends. This will apply such updates post-send for web requests. Note that any checks from "syncChecks" are still synchronous.
Parameters
array$config
Exceptions
LogicException

Reimplemented from FileBackend.

Definition at line 97 of file FileBackendMultiWrite.php.

References FileBackend\$domainId, FileBackend\$logger, $masterIndex, and FileBackend\$name.

Member Function Documentation

◆ accessibilityCheck()

FileBackendMultiWrite::accessibilityCheck ( array $paths)

Check that a set of file paths are usable across all internal backends.

Parameters
array$pathsList of storage paths
Returns
StatusValue

Definition at line 323 of file FileBackendMultiWrite.php.

References $path, FileBackend\newStatus(), and substPaths().

Referenced by doOperationsInternal().

◆ clearCache()

FileBackendMultiWrite::clearCache ( array $paths = null)

Invalidate any in-process file stat and property cache.

If $paths is given, then only the cache for those files will be cleared.

See also
FileBackend::getFileStat()
Parameters
array | null$pathsStorage paths (optional)

Reimplemented from FileBackend.

Definition at line 766 of file FileBackendMultiWrite.php.

References substPaths().

Referenced by doOperationsInternal().

◆ concatenate()

FileBackendMultiWrite::concatenate ( array $params)

Concatenate a list of storage files into a single file system file.

The target path should refer to a file that is already locked or otherwise safe from modification from other processes. Normally, the file will be a new temp file, which should be adequate.

Parameters
array$paramsOperation parameters, include:
  • srcs : ordered source storage paths (e.g. chunk1, chunk2, ...)
  • dst : file system path to 0-byte temp file
  • parallelize : try to do operations in parallel when possible
Returns
StatusValue

Reimplemented from FileBackend.

Definition at line 628 of file FileBackendMultiWrite.php.

References concatenate(), getReadIndexFromParams(), FileBackend\newStatus(), and substOpPaths().

Referenced by concatenate().

◆ consistencyCheck()

FileBackendMultiWrite::consistencyCheck ( array $paths)

Check that a set of files are consistent across all internal backends.

This method should only be called if the files are locked or the backend is in read-only mode

Parameters
array$pathsList of storage paths
Returns
StatusValue

Definition at line 235 of file FileBackendMultiWrite.php.

References $masterIndex, $path, FileBackend\newStatus(), substOpPaths(), substPaths(), and true.

Referenced by doOperationsInternal().

◆ directoryExists()

FileBackendMultiWrite::directoryExists ( array $params)

Check if a directory exists at a given storage path.

For backends using key/value stores, a directory is said to exist whenever there exist any files with paths using the given directory path as a prefix followed by a forward slash. For example, if there is a file called "mwstore://backend/container/dir/path.svg" then directories are said to exist at "mwstore://backend/container" and "mwstore://backend/container/dir". These can be thought of as "virtual" directories.

Backends that directly use a filesystem layer might enumerate empty directories. The clean() method should always be used when files are deleted or moved if this is a concern. This is a trade-off to avoid write amplication/contention on file changes or read amplification when calling this method.

Storage backends with eventual consistency might return stale data.

See also
FileBackend::EXISTENCE_ERROR
FileBackend::clean()
Parameters
array$paramsParameters include:
  • dir : storage directory
Returns
bool|null Whether a directory exists or null (I/O error)
Since
1.20

Reimplemented from FileBackend.

Definition at line 744 of file FileBackendMultiWrite.php.

References $masterIndex, and substOpPaths().

◆ doClean()

FileBackendMultiWrite::doClean ( array $params)
protected
See also
FileBackend::clean()
Parameters
array$params
Returns
StatusValue

Reimplemented from FileBackend.

Definition at line 592 of file FileBackendMultiWrite.php.

References doDirectoryOp().

◆ doDirectoryOp()

FileBackendMultiWrite::doDirectoryOp ( $method,
array $params )
protected
Parameters
string$methodOne of (doPrepare,doSecure,doPublish,doClean)
array$paramsMethod arguments
Returns
StatusValue

Definition at line 601 of file FileBackendMultiWrite.php.

References $masterIndex, FileBackend\newStatus(), and substOpPaths().

Referenced by doClean(), doPrepare(), doPublish(), and doSecure().

◆ doOperationsInternal()

FileBackendMultiWrite::doOperationsInternal ( array $ops,
array $opts )
finalprotected

◆ doPrepare()

FileBackendMultiWrite::doPrepare ( array $params)
protected
See also
FileBackend::prepare()
Parameters
array$params
Returns
StatusValue Good status without value for success, fatal otherwise.

Reimplemented from FileBackend.

Definition at line 580 of file FileBackendMultiWrite.php.

References doDirectoryOp().

◆ doPublish()

FileBackendMultiWrite::doPublish ( array $params)
protected
See also
FileBackend::publish()
Parameters
array$params
Returns
StatusValue

Reimplemented from FileBackend.

Definition at line 588 of file FileBackendMultiWrite.php.

References doDirectoryOp().

◆ doQuickOperationsInternal()

FileBackendMultiWrite::doQuickOperationsInternal ( array $ops,
array $opts )
protected
See also
FileBackend::doQuickOperations()
Parameters
array$ops
array$opts
Returns
StatusValue
Since
1.20

Reimplemented from FileBackend.

Definition at line 547 of file FileBackendMultiWrite.php.

References $masterIndex, hasVolatileSources(), FileBackend\newStatus(), and substOpBatchPaths().

◆ doSecure()

FileBackendMultiWrite::doSecure ( array $params)
protected
See also
FileBackend::secure()
Parameters
array$params
Returns
StatusValue

Reimplemented from FileBackend.

Definition at line 584 of file FileBackendMultiWrite.php.

References doDirectoryOp().

◆ fileExists()

FileBackendMultiWrite::fileExists ( array $params)

Check if a file exists at a storage path in the backend.

This returns false if only a directory exists at the path.

Callers that only care if a file is readily accessible can use non-strict comparisons on the result. If "does not exist" and "existence is unknown" must be distinguished, then strict comparisons to true/null should be used.

See also
FileBackend::EXISTENCE_ERROR
FileBackend::directoryExists()
Parameters
array$paramsParameters include:
  • src : source storage path
  • latest : use the latest available data
Returns
bool|null Whether the file exists or null (I/O error)

Reimplemented from FileBackend.

Definition at line 639 of file FileBackendMultiWrite.php.

References getReadIndexFromParams(), and substOpPaths().

Referenced by fileStoragePathsForOps().

◆ fileStoragePathsForOps()

FileBackendMultiWrite::fileStoragePathsForOps ( array $ops)
protected

Get a list of file storage paths to read or write for a list of operations.

Parameters
array$opsSame format as doOperations()
Returns
array List of storage paths to files (does not include directories)

Definition at line 444 of file FileBackendMultiWrite.php.

References fileExists().

Referenced by doOperationsInternal().

◆ getDirectoryList()

FileBackendMultiWrite::getDirectoryList ( array $params)

Get an iterator to list all directories under a storage directory.

If the directory is of the form "mwstore://backend/container", then all directories in the container will be listed. If the directory is of form "mwstore://backend/container/dir", then all directories directly under that directory will be listed. Results will be storage directories relative to the given directory.

Storage backends with eventual consistency might return stale data.

Failures during iteration can result in FileBackendError exceptions (since 1.22).

See also
FileBackend::LIST_ERROR
FileBackend::directoryExists()
Parameters
array$paramsParameters include:
  • dir : storage directory
  • topOnly : only return direct child dirs of the directory
Returns
Traversable|array|null Directory list enumerator or null (initial I/O error)
Since
1.20

Reimplemented from FileBackend.

Definition at line 750 of file FileBackendMultiWrite.php.

References $masterIndex, and substOpPaths().

◆ getFeatures()

FileBackendMultiWrite::getFeatures ( )

Get the a bitfield of extra features supported by the backend medium.

Stability: stable
to override
Returns
int Bitfield of FileBackend::ATTR_* flags
Since
1.23

Reimplemented from FileBackend.

Definition at line 762 of file FileBackendMultiWrite.php.

References $masterIndex.

◆ getFileContentsMulti()

FileBackendMultiWrite::getFileContentsMulti ( array $params)

Like getFileContents() except it takes an array of storage paths and returns an order preserved map of storage paths to their content.

See also
FileBackend::getFileContents()
Parameters
array$paramsParameters include:
  • srcs : list of source storage paths
  • latest : use the latest available data
  • parallelize : try to do operations in parallel when possible
Returns
string[]|false[] Map of (path name => file content or false on failure)
Since
1.20

Reimplemented from FileBackend.

Definition at line 674 of file FileBackendMultiWrite.php.

References $path, getReadIndexFromParams(), substOpPaths(), and unsubstPaths().

◆ getFileHttpUrl()

FileBackendMultiWrite::getFileHttpUrl ( array $params)

Return an HTTP URL to a given file that requires no authentication to use.

The URL may be pre-authenticated (via some token in the URL) and temporary. This will return null if the backend cannot make an HTTP URL for the file.

This is useful for key/value stores when using scripts that seek around large files and those scripts (and the backend) support HTTP Range headers. Otherwise, one would need to use getLocalReference(), which involves loading the entire file on to local disk.

See also
FileBackend::TEMPURL_ERROR
Parameters
array$paramsParameters include:
  • src : source storage path
  • ttl : lifetime (seconds) if pre-authenticated; default is 1 day
Returns
string|null URL or null (not supported or I/O error)
Since
1.21

Reimplemented from FileBackend.

Definition at line 737 of file FileBackendMultiWrite.php.

References getReadIndexFromParams(), and substOpPaths().

◆ getFileList()

FileBackendMultiWrite::getFileList ( array $params)

Get an iterator to list all stored files under a storage directory.

If the directory is of the form "mwstore://backend/container", then all files in the container will be listed. If the directory is of form "mwstore://backend/container/dir", then all files under that directory will be listed. Results will be storage paths relative to the given directory.

Storage backends with eventual consistency might return stale data.

Failures during iteration can result in FileBackendError exceptions (since 1.22).

See also
FileBackend::LIST_ERROR
Parameters
array$paramsParameters include:
  • dir : storage directory
  • topOnly : only return direct child files of the directory (since 1.20)
  • adviseStat : set to true if stat requests will be made on the files (since 1.22)
Returns
Traversable|array|null File list enumerator or null (initial I/O error)

Reimplemented from FileBackend.

Definition at line 756 of file FileBackendMultiWrite.php.

References $masterIndex, and substOpPaths().

◆ getFileProps()

FileBackendMultiWrite::getFileProps ( array $params)

Get the properties of the content of the file at a storage path in the backend.

This gives the result of FSFile::getProps() on a local copy of the file.

Parameters
array$paramsParameters include:
  • src : source storage path
  • latest : use the latest available data
Returns
array Properties map; FSFile::placeholderProps() if file missing or on I/O error

Reimplemented from FileBackend.

Definition at line 695 of file FileBackendMultiWrite.php.

References getReadIndexFromParams(), and substOpPaths().

◆ getFileSha1Base36()

FileBackendMultiWrite::getFileSha1Base36 ( array $params)

Get a SHA-1 hash of the content of the file at a storage path in the backend.

See also
FileBackend::SHA1_FAIL
Parameters
array$paramsParameters include:
  • src : source storage path
  • latest : use the latest available data
Returns
string|false Hash string or false (missing file or I/O error)

Reimplemented from FileBackend.

Definition at line 688 of file FileBackendMultiWrite.php.

References getReadIndexFromParams(), and substOpPaths().

◆ getFileSize()

FileBackendMultiWrite::getFileSize ( array $params)

Get the size (bytes) of a file at a storage path in the backend.

See also
FileBackend::SIZE_FAIL
Parameters
array$paramsParameters include:
  • src : source storage path
  • latest : use the latest available data
Returns
int|false File size in bytes or false (missing file or I/O error)

Reimplemented from FileBackend.

Definition at line 653 of file FileBackendMultiWrite.php.

References getReadIndexFromParams(), and substOpPaths().

◆ getFileStat()

FileBackendMultiWrite::getFileStat ( array $params)

Get quick information about a file at a storage path in the backend.

If the file does not exist, then this returns false. Otherwise, the result is an associative array that includes:

  • mtime : the last-modified timestamp (TS_MW)
  • size : the file size (bytes) Additional values may be included for internal use only.
See also
FileBackend::STAT_ABSENT
FileBackend::STAT_ERROR
Parameters
array$paramsParameters include:
  • src : source storage path
  • latest : use the latest available data
Returns
array|false|null Attribute map, false (missing file), or null (I/O error)

Reimplemented from FileBackend.

Definition at line 660 of file FileBackendMultiWrite.php.

References getReadIndexFromParams(), and substOpPaths().

◆ getFileTimestamp()

FileBackendMultiWrite::getFileTimestamp ( array $params)

Get the last-modified timestamp of the file at a storage path.

See also
FileBackend::TIMESTAMP_FAIL
Parameters
array$paramsParameters include:
  • src : source storage path
  • latest : use the latest available data
Returns
string|false TS_MW timestamp or false (missing file or I/O error)

Reimplemented from FileBackend.

Definition at line 646 of file FileBackendMultiWrite.php.

References getReadIndexFromParams(), and substOpPaths().

◆ getFileXAttributes()

FileBackendMultiWrite::getFileXAttributes ( array $params)

Get metadata about a file at a storage path in the backend.

If the file does not exist, then this returns false. Otherwise, the result is an associative array that includes:

  • headers : map of HTTP headers used for GET/HEAD requests (name => value)
  • metadata : map of file metadata (name => value) Metadata keys and headers names will be returned in all lower-case. Additional values may be included for internal use only.

Use FileBackend::hasFeatures() to check how well this is supported.

See also
FileBackend::XATTRS_FAIL
Parameters
array$params$params include:
  • src : source storage path
  • latest : use the latest available data
Returns
array|false File metadata array or false (missing file or I/O error)
Since
1.23

Reimplemented from FileBackend.

Definition at line 667 of file FileBackendMultiWrite.php.

References getReadIndexFromParams(), and substOpPaths().

◆ getLocalCopyMulti()

FileBackendMultiWrite::getLocalCopyMulti ( array $params)

Like getLocalCopy() except it takes an array of storage paths and yields an order preserved-map of storage paths to temporary local file copies.

Multiple calls to this method for the same path will create new copies.

See also
FileBackend::getLocalCopy()
Parameters
array$paramsParameters include:
  • srcs : list of source storage paths
  • latest : use the latest available data
  • parallelize : try to do operations in parallel when possible
Returns
array Map of (path name => TempFSFile or null on failure)
Since
1.20

Reimplemented from FileBackend.

Definition at line 723 of file FileBackendMultiWrite.php.

References $path, getReadIndexFromParams(), substOpPaths(), and unsubstPaths().

◆ getLocalReferenceMulti()

FileBackendMultiWrite::getLocalReferenceMulti ( array $params)

Like getLocalReference() except it takes an array of storage paths and yields an order-preserved map of storage paths to temporary local file copies.

Never modify the returned files since they might be originals, they might be shared among multiple callers of this method, or the backend might internally keep FSFile references for deferred operations.

See also
FileBackend::getLocalReference()
Parameters
array$paramsParameters include:
  • srcs : list of source storage paths
  • latest : use the latest available data
  • parallelize : try to do operations in parallel when possible
Returns
array Map of (path name => FSFile or null on failure)
Since
1.20

Reimplemented from FileBackend.

Definition at line 709 of file FileBackendMultiWrite.php.

References $path, getReadIndexFromParams(), substOpPaths(), and unsubstPaths().

◆ getReadIndexFromParams()

FileBackendMultiWrite::getReadIndexFromParams ( array $params)
protected
Parameters
array$params
Returns
int The master or read affinity backend index, based on $params['latest']

Definition at line 810 of file FileBackendMultiWrite.php.

References $readIndex.

Referenced by concatenate(), fileExists(), getFileContentsMulti(), getFileHttpUrl(), getFileProps(), getFileSha1Base36(), getFileSize(), getFileStat(), getFileTimestamp(), getFileXAttributes(), getLocalCopyMulti(), getLocalReferenceMulti(), preloadFileStat(), and streamFile().

◆ getScopedLocksForOps()

FileBackendMultiWrite::getScopedLocksForOps ( array $ops,
StatusValue $status )

Get an array of scoped locks needed for a batch of file operations.

Normally, FileBackend::doOperations() handles locking, unless the 'nonLocking' param is passed in. This function is useful if you want the files to be locked for a broader scope than just when the files are changing. For example, if you need to update DB metadata, you may want to keep the files locked until finished.

See also
FileBackend::doOperations()
Parameters
array$opsList of file operations to FileBackend::doOperations()
StatusValue$statusStatusValue to update on lock/unlock
Returns
ScopedLock|null RAII-style self-unlocking lock or null on failure
Since
1.20

Reimplemented from FileBackend.

Definition at line 785 of file FileBackendMultiWrite.php.

References $masterIndex, FileBackend\getScopedFileLocks(), substOpBatchPaths(), and unsubstPaths().

Referenced by doOperationsInternal().

◆ hasVolatileSources()

FileBackendMultiWrite::hasVolatileSources ( array $ops)
protected
Parameters
array[]$opsFile operations for FileBackend::doOperations()
Returns
bool Whether there are file path sources with outside lifetime/ownership

Definition at line 537 of file FileBackendMultiWrite.php.

Referenced by doOperationsInternal(), and doQuickOperationsInternal().

◆ preloadCache()

FileBackendMultiWrite::preloadCache ( array $paths)

Preload persistent file stat cache and property cache into in-process cache.

This should be used when stat calls will be made on a known list of a many files.

See also
FileBackend::getFileStat()
Parameters
array$pathsStorage paths

Reimplemented from FileBackend.

Definition at line 773 of file FileBackendMultiWrite.php.

References $readIndex, and substPaths().

◆ preloadFileStat()

FileBackendMultiWrite::preloadFileStat ( array $params)

Preload file stat information (concurrently if possible) into in-process cache.

This should be used when stat calls will be made on a known list of a many files. This does not make use of the persistent file stat cache.

See also
FileBackend::getFileStat()
Parameters
array$paramsParameters include:
  • srcs : list of source storage paths
  • latest : use the latest available data
Returns
bool Whether all requests proceeded without I/O errors (since 1.24)
Since
1.23

Reimplemented from FileBackend.

Definition at line 778 of file FileBackendMultiWrite.php.

References getReadIndexFromParams(), and substOpPaths().

◆ resyncFiles()

FileBackendMultiWrite::resyncFiles ( array $paths,
$resyncMode = true )

Check that a set of files are consistent across all internal backends and re-synchronize those files against the "multi master" if needed.

This method should only be called if the files are locked

Parameters
array$pathsList of storage paths
string | bool$resyncModeFalse, True, or "conservative"; see __construct()
Returns
StatusValue

Definition at line 351 of file FileBackendMultiWrite.php.

References $masterIndex, $path, FileBackend\newStatus(), substOpPaths(), and true.

Referenced by doOperationsInternal().

◆ streamFile()

FileBackendMultiWrite::streamFile ( array $params)

Stream the content of the file at a storage path in the backend.

If the file does not exists, an HTTP 404 error will be given. Appropriate HTTP headers (Status, Content-Type, Content-Length) will be sent if streaming began, while none will be sent otherwise. Implementations should flush the output buffer before sending data.

Parameters
array$paramsParameters include:
  • src : source storage path
  • headers : list of additional HTTP headers to send if the file exists
  • options : HTTP request header map with lower case keys (since 1.28). Supports: range : format is "bytes=(\\d*-\\d*)" if-modified-since : format is an HTTP date
  • headless : only include the body (and headers from "headers") (since 1.28)
  • latest : use the latest available data
  • allowOB : preserve any output buffers (since 1.28)
Returns
StatusValue

Reimplemented from FileBackend.

Definition at line 702 of file FileBackendMultiWrite.php.

References getReadIndexFromParams(), and substOpPaths().

◆ substOpBatchPaths()

FileBackendMultiWrite::substOpBatchPaths ( array $ops,
FileBackendStore $backend )
protected

Substitute the backend name in storage path parameters for a set of operations with that of a given internal backend.

Parameters
array$opsList of file operation arrays
FileBackendStore$backend
Returns
array

Definition at line 475 of file FileBackendMultiWrite.php.

References substPaths().

Referenced by doOperationsInternal(), doQuickOperationsInternal(), getScopedLocksForOps(), and substOpPaths().

◆ substOpPaths()

◆ substPaths()

FileBackendMultiWrite::substPaths ( $paths,
FileBackendStore $backend )
protected

Substitute the backend of storage paths with an internal backend's name.

Parameters
array | string$pathsList of paths or single string path
FileBackendStore$backend
Returns
string[]|string

Definition at line 510 of file FileBackendMultiWrite.php.

References StringUtils\escapeRegexReplacement().

Referenced by accessibilityCheck(), clearCache(), consistencyCheck(), preloadCache(), and substOpBatchPaths().

◆ unsubstPaths()

FileBackendMultiWrite::unsubstPaths ( $paths,
FileBackendStore $backend )
protected

Substitute the backend of internal storage paths with the proxy backend's name.

Parameters
array | string$pathsList of paths or single string path
FileBackendStore$backendinternal storage backend
Returns
string[]|string

Definition at line 525 of file FileBackendMultiWrite.php.

References StringUtils\escapeRegexReplacement(), and FileBackend\getName().

Referenced by getFileContentsMulti(), getLocalCopyMulti(), getLocalReferenceMulti(), and getScopedLocksForOps().

Member Data Documentation

◆ $asyncWrites

bool FileBackendMultiWrite::$asyncWrites = false
protected

Definition at line 60 of file FileBackendMultiWrite.php.

◆ $autoResync

string bool FileBackendMultiWrite::$autoResync = false
protected

Definition at line 57 of file FileBackendMultiWrite.php.

◆ $backends

FileBackendStore [] FileBackendMultiWrite::$backends = []
protected

Prioritized list of FileBackendStore objects.

Definition at line 47 of file FileBackendMultiWrite.php.

◆ $masterIndex

int FileBackendMultiWrite::$masterIndex = -1
protected

◆ $readIndex

int FileBackendMultiWrite::$readIndex = -1
protected

Index of read affinity backend.

Definition at line 52 of file FileBackendMultiWrite.php.

Referenced by getReadIndexFromParams(), and preloadCache().

◆ $syncChecks

int FileBackendMultiWrite::$syncChecks = 0
protected

Bitfield.

Definition at line 55 of file FileBackendMultiWrite.php.


The documentation for this class was generated from the following file: